FG ute side airbag resistor

[nubexr6t]

Hi all

  Not sure if this has been covered by a previous post but I am trying to work out a problem with my ute. I bought my 09 FG turbo ute last year and it had F6 seats installed by the previous owner. The problem lies in that the seats have side airbags. The harness from the seats was plugged into the body loom but not being a vehicle that came with side airbags the confuser has detected something wrong and sets a code each time I turn the key after 30 seconds. My cheap elm reader and torque app says the DTC is related to side airbags. So is there a resistor or something that can be plugged into the plug to keep the computer happy?. I am wondering what was plugged into the plug originally like a resistor plug as the original seats dont have the wiring to plug into this plug. And I assume that the loom going to them is the original loom with the pre tensioner and seat power etc but with the extra plug there for the seat airbag. Maybe someone with the same ute can check next to thier seat and see what is plugged in there. TIA

[nubexr6t]

Well to answer my own question. It was solved by using the little blanking plug from FG models that dont have side airbags.  Long story short I went to the wreckers to look for some parts and saw a FG sedan that had the plugs in place and grabbed 2.

[fgxrblack]

Hey mate you wouldn’t be able to get a photo of the resistor for me or even better a resistance value cheers

[Samboy FG ute]

Hi mate I’m trying to deal with this exact problem, and finding it near impossible to find any more info on these blanking plugs for the seat air bag. Please any more info would be much appreciated! Cheers