mattyb Donating Members 1,097 Member For: 16y 6m 19d Gender: Male Location: Gold Coast, QLD Posted 13/08/17 03:59 AM Share Posted 13/08/17 03:59 AM So, I'm BACK! I finally decided it was time to mod the old girl. I dropped my '10 F6 that has 160,000km on the clock into ASG Motorsports on the Gold Coast for Aaron to finish what I started, and tune the old girl. I did the following... Tog 4" exhaust 460 intank pump 1125cc injectors Plaz 1000hp cooler kit Plaz Cai Plaz Battery relo Ported exhaust housing 12.5psi actuator Hi-Flow thermo ASG did the following... Turbo Oil feed line Tranny cooler ZF steel pan and service Plaz HD valve springs Then we encountered a problem. My exhaust cam was rooted. The usual FG wear, so I decided to go Atomic Stage 4. We've had some discussion (aaron my tuner, and I) and seeing as though the car has 160,000 on the clock and we've put HD valve springs in, now might be a good time to replace the cam chain, tensioner & sprocket. Seeing as though the front cover needs to come off to do this, we're going to do the oil pump gears too. Whats peoples thoughts on anything else being done while it's apart? The only other thing I can think of was maybe head studs, in case I decide to push the power up in the future? 3 Link to comment Share on other sites More sharing options...
JVK Silver Donating Members 751 Member For: 19y 15d Gender: Male Location: North West Hot Hell,VIC Posted 13/08/17 04:12 AM Share Posted 13/08/17 04:12 AM Welcome back, You may as well do the head studs and new valve stem seals and your done. 1 Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 2m 6d Gender: Male Location: Perth Posted 13/08/17 06:58 AM Share Posted 13/08/17 06:58 AM During that 160k was the oil changed ???? Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 7m 2d Gender: Male Location: Adelaide Posted 13/08/17 07:03 AM Share Posted 13/08/17 07:03 AM Yeh to fully synthetic ...... 1 Link to comment Share on other sites More sharing options...
Gabbo_32 Member 69 Member For: 10y 8m 12d Gender: Male Location: SE Melbourne, Victoria Posted 13/08/17 07:09 AM Share Posted 13/08/17 07:09 AM lolol Link to comment Share on other sites More sharing options...
Pixy Angel Expert Donating Members 9,132 Member For: 19y 10m 6d Gender: Male Location: North Jamberoo, NSW Posted 13/08/17 09:02 AM Share Posted 13/08/17 09:02 AM Welcome back bro Asking for a new name change for a moment I thought it was @MattyP and had me thinking you didnt go anywhere and where did the F6 come from. New life in the old girl she is now 21 again. ZOOM ZOOM!! Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 7m 29d Gender: Male Location: Central Coast Posted 13/08/17 11:25 AM Share Posted 13/08/17 11:25 AM I never left mate Stage 4 cams seem way to extreme if considered for regular street use, STD Fg cam spec is tip top 1 Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 8m 1d Gender: Male Location: Western Sydney Posted 13/08/17 12:21 PM Share Posted 13/08/17 12:21 PM Stage 4s sound awesome, fuel economy not so much. 2 Link to comment Share on other sites More sharing options...
mattyb Donating Members 1,097 Member For: 16y 6m 19d Gender: Male Location: Gold Coast, QLD Posted 14/08/17 04:56 AM Author Share Posted 14/08/17 04:56 AM The car started its life as a mates lease car, so only had Ford oil changes every 15,000km. I got the car at 80,000 and changed to Nulon and was doing the oil changes every 10,000. The lucky thing is the turbo oil feed line never blocked. Also switching to Penrite HPR oil now. I know that Stage 4 Cams are a bit overkill seeing as though standard can hit massive numbers, however I have blown one motor in my last XR6T, and would rather over engineer. ...and just ordered head studs too. 1 Link to comment Share on other sites More sharing options...
kink Member 294 Member For: 16y 4m 28d Gender: Male Location: Adelaide Posted 14/08/17 11:21 PM Share Posted 14/08/17 11:21 PM On the Club FG Facebook page there was a post asking to post vids of cammed barras.. and my god they can sound angry haha Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now