Jump to content

Recommended Posts

  • All stock bar the k&n panel filter
  • Silver Donating Members
  • Member For: 13y 1m 20d
  • Gender: Male
  • Location: Perth
  • ...JD TUNING ADELAIDE...
  • Gold Donating Members
  • Member For: 16y 11m 2d
  • Gender: Male
  • Location: Adelaide

I can get you a new TruTrack delivered asap, just send me a PM :) 

  • Member
  • Member For: 15y 6m 18d
  • Gender: Male
  • Location: West Perth.

You can also try these guys http://www.dbsperth.com.au/ they regularly have specials on their Failbook page and it appears they have done work on the MonstaTorque car which they have a photo of.

  • 10 months later...
  • Member
  • Member For: 16y 7m 12d
  • Gender: Male
  • Location: Highett Victoria

I have an Eaton Trutrac in mine, have to say if I had it to do again I would go clutch style LSD. Half the price, and yes you do have to replace clutches but about that time you will probably need to do the bushes any way.

Negative of the Trutrac for me is they wine a bit and you get wheel spin for the single wheel before the other cuts in. Plus it is only LSD when accelerating and single spinner when decelerating or costing so if you use the gears hard to slow down not the same efficient and different balance. Also if one wheel lifts on fast corner it will hit the ground spinning slower than opposite wheel, where as the convention LSD still spins at the same speed when it hits the ground which makes it easier to handle. Ture trac is only better on gravel. 

  • Thanks 1
  • 2 months later...
  • XR50T
  • Gold Donating Members
  • Member For: 12y 2d
  • Gender: Male
  • Location: Western Sydney

Agree with what serb said.
Trutrack is a heap of junk in my opinion. If it's an auto and you only punch it in a straight line every now and then it'll be ok.

Under straight line acceleration they're ok, crap everywhere else. Rubbish under decell and engine braking, noisy when doing so aswell.

  • New Member
  • Member For: 6y 8m 24d
  • Location: Adelaide

Yeah personally also not a massive fan of the Trutrack. I've gone with the Borg Warner/ Dana centre on my G6ET this time around and am very happy. (this is the same diff centre as the XR6T)

I think this is the right ones...

FORD PART NO: BG 4880 B,  BG4880B.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'