OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 6m 23d Gender: Male Location: Western Sydney Posted 20/04/17 12:36 PM Share Posted 20/04/17 12:36 PM I used some liquid telfon sealant, speed shops sell it.As for not drilling the hole, look inside the banjo fitting they have alot of room open in them to allow flow from all around. You can't guarantee the hole will line up with the line end of the banjo anyway. Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 29d Gender: Male Location: Perth Posted 20/04/17 12:41 PM Share Posted 20/04/17 12:41 PM Oil entry into the turbo is 0.8 mm. SO........... Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 2d Gender: Male Location: Perth Posted 20/04/17 12:50 PM Share Posted 20/04/17 12:50 PM Ain't going to hurt, but probably ain't going to help either. Either way kudos for spotting it and thanks for sharing your work. Link to comment Share on other sites More sharing options...
bamk2f6tornado Bronze Donating Members 777 Member For: 10y 11m 22d Gender: Male Location: Rockhampton Qld Posted 20/04/17 08:23 PM Share Posted 20/04/17 08:23 PM This is not an accurate 'how to' at all. Not a single swear word. Everyone knows this job is not possible especially on an f6 without dropping the c word haha Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 29d Gender: Male Location: Perth Posted 21/04/17 03:40 AM Share Posted 21/04/17 03:40 AM (edited) Easy once you have done a few. And having the correct 24mm tools. Just don't over tighten the tapered fitting into the block. And don't forget to an anneal the copper washers. Edited 21/04/17 03:42 AM by arronm Link to comment Share on other sites More sharing options...
My_XR6_Turbo Member 282 Member For: 20y 3m 23d Posted 21/04/17 07:19 AM Author Share Posted 21/04/17 07:19 AM What's the difference with the F6? Link to comment Share on other sites More sharing options...
Box stock T. Member 1,384 Member For: 9y 7m 18d Posted 21/04/17 08:02 AM Share Posted 21/04/17 08:02 AM 4 hours ago, arronm said: And don't forget to anal the coppers. FTFY. 1 Link to comment Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,423 Member For: 14y 11m Gender: Male Location: Melbourne Posted 21/04/17 08:58 AM Share Posted 21/04/17 08:58 AM lel Link to comment Share on other sites More sharing options...
bamk2f6tornado Bronze Donating Members 777 Member For: 10y 11m 22d Gender: Male Location: Rockhampton Qld Posted 21/04/17 08:31 PM Share Posted 21/04/17 08:31 PM What's the difference with the F6?An f6 has an oil cooler Sandwich plate Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,992 Member For: 16y 7m 15d Gender: Male Location: Melbourne Posted 22/04/17 01:53 AM Share Posted 22/04/17 01:53 AM and also an oil pressure sender on the end of the engine block adapter piece so a long socket doesn't fit over it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now