JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 9m 1d Gender: Male Location: Adelaide Posted 17/04/17 10:38 AM Share Posted 17/04/17 10:38 AM "Most" intercooler's specific to the B series XR6T requires cutting of front support bar and bending of the A/C line, super common and that's just the way it is... do it slowly and upwards and towards the headlight area in general and it will be fine ( done it many times along with any performance workshop will ) and both plazmaman and PW show instructions on how to do it. The Plazmaman 800hp kit doesn't require any cutting just bending of AC line and fits like a glove and yes I can help you out on a kit if that's what you're after 1 Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 9m 7d Gender: Male Location: Central Queensland Posted 17/04/17 11:18 AM Share Posted 17/04/17 11:18 AM Unlike the majority, old mate here, decided to fix the problem and not be a rought arse... See the link below, I think that the pics of my modification is the 4th post from the bottom on the page. http://www.fordxr6turbo.com/forum/topic/89792-my-build/?page=6 Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 9m 1d Gender: Male Location: Adelaide Posted 17/04/17 11:26 AM Share Posted 17/04/17 11:26 AM Great idea if you happen to split the hard line when bending it OP haha but honestly out of the 100 people giving it the bend treatment only around 4 or 5 fhuck it up and split it, so gently as she goes Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 9m 7d Gender: Male Location: Central Queensland Posted 17/04/17 11:40 AM Share Posted 17/04/17 11:40 AM Bending the lines just daisy chains the gained distance further along the line. It results in kinks (reduced diameter) and is ugly as... Do it right, do it once. Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 16,170 Member For: 10y 1m 2d Gender: Male Location: South Australia Posted 17/04/17 11:41 AM Share Posted 17/04/17 11:41 AM 20 minutes ago, HI PSI said: decided to modify his entire car and not be a rough arse... Ftfy Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 9m 7d Gender: Male Location: Central Queensland Posted 17/04/17 11:49 AM Share Posted 17/04/17 11:49 AM 1 minute ago, Puffwagon said: Ftfy 20 minutes ago, HI PSI said: Modified his car to a standard, did not cut corners and wasn't a dodgy carnt. Ftfy... Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 9m 1d Gender: Male Location: Adelaide Posted 17/04/17 11:55 AM Share Posted 17/04/17 11:55 AM It's very hard to talk customers into nearly an additional 50% of the intercooler cost for something that can be bent out the way just for the sake of saying it's been done "right" when the system still works exactly how it did before I would say there would be no greater than 10 people who have done what you've done vs the thousands that have bent it out the way just sayn..... 2 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 16,170 Member For: 10y 1m 2d Gender: Male Location: South Australia Posted 17/04/17 12:07 PM Share Posted 17/04/17 12:07 PM The thing is that most people either can't do it themselves or can't justify the $500 to $600 a shop would charge to r&r the bumper assy etc, cut and shut and regas the system. If you already have the tools and know how to do it then great, I'd recommend it too. For everyone else a 5 minute bend job is sufficient. I for one dgaf what some piping hidden behind my bumper looks like. 1 Link to comment Share on other sites More sharing options...
My_XR6_Turbo Member 282 Member For: 20y 7m 2d Posted 19/04/17 08:05 AM Author Share Posted 19/04/17 08:05 AM I've scored a plazmaman pro series for $600 (I think that's a good price). It "came" with the cold side piping but it's not the plazmaman one. It's 60mm in diameter. Will that be a big restriction? The plazmaman one is 76mm from what I read. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 9m 1d Gender: Male Location: Adelaide Posted 19/04/17 09:28 AM Share Posted 19/04/17 09:28 AM (edited) All plazmaman gear is Pro Series lol what HP rated unit is it ? The 76 series is 800/1000/1200 hp specs yeh second hand buying hasn't done you any favours with that 60mm pipe Edited 19/04/17 09:29 AM by JETURBO Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now