Jump to content

Revs won't drop between gear changes


blacktur8oute

Recommended Posts

  • Member
  • Member For: 10y 11m 21d
  • Gender: Male

Hi all

took the car out for a squirt today and noticed under load from 3rd to 4th gear the revs hardly drop and instantly it's hitting the limiter, my first thought was I lost traction but after trying again didn't feel like I lost traction and did the same thing any thoughts guys why it's doing this and what it could be

Link to comment
Share on other sites

  • less WHY; more WOT
  • Site Developer
  • Member For: 16y 7m 12d
  • Gender: Male
  • Location: Melbourne

manual or auto (BTR or ZF)?

 

I'm assuming ZF auto... so that means the clutches in the gearbox are slipping as they try to apply the pressure required to change gear it's not engaging the next gear quick enough to avoid the limiter, I think...

Link to comment
Share on other sites

  • less WHY; more WOT
  • Site Developer
  • Member For: 16y 7m 12d
  • Gender: Male
  • Location: Melbourne

yeah, 3rd to 4th is the most common clutch set to have issues (as people usually aren't getting to the top of 4th gear to change under load to 5th :P ) in a ZF vehicle with a reasonable amount of power.

 

A fluid change on the gearbox might alleviate the symptoms, but it's likely the gearbox will need to be removed and rebuilt (expensive).

Link to comment
Share on other sites

  • ...JD TUNING ADELAIDE...
  • Gold Donating Members
  • Member For: 16y 5m 22d
  • Gender: Male
  • Location: Adelaide

countless times I've had a ZF come in after it's been "serviced" and has issues since that can be fixed by checking levels correctly and if it's been ZF "Tuned" and now won't engage 4th then your tuner needs to have another go at it ;) 

Link to comment
Share on other sites

  • Member
  • Member For: 10y 11m 21d
  • Gender: Male
8 hours ago, JETURBO said:

countless times I've had a ZF come in after it's been "serviced" and has issues since that can be fixed by checking levels correctly and if it's been ZF "Tuned" and now won't engage 4th then your tuner needs to have another go at it ;) 

Yes the ZF Is tuned,Your correct, it was low on oil about 800ml, I followed the level check procedure took it out had one go as it started to rain and it engaged 4th the way it should 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'