winstor Member 611 Member For: 15y 8m 29d Posted 21/04/12 05:32 AM Share Posted 21/04/12 05:32 AM (edited) Just checked my fronts, I have roughly 20mm from the edge of the rim to the outside of the guard, so if you wanted to roll/pump your fronts and run a little bit of camber you could run the following in 19s.19x8.0 -119x8.5 +519x9.0 +1119x9.5 +1819x10.0 +24The 19x10 +24 might not have the required clearance on the inside however, so 19x10 +21 would probably be better.Our cars (FGs at least) can run some very similar offsets and widths as the 350z, so a good place to find high quality rims for good prices is the my350z forums, provided you can get the guys to ship to Aus I think Tocchi was running a 19x10 +22 on his XR8 with some camber in the front.It seems quite possible that you could run a 19x10 square setup even on the sedans with the correct offsets, camber adjustments and guard rolling/pumping, and maybe even an 11 in the rear.Looking at a set of the Varrstoen TE37 reps in 19x9.5/10.5 +22, however have been told that the 9.5 +22 will not clear the 6 pot Brembos. Edited 21/04/12 05:37 AM by winstor Link to comment Share on other sites More sharing options...
EFSIX I Lead Not Follow... Member 1,026 Member For: 12y 7m 6d Gender: Male Location: Westside,Melbourne Posted 21/04/12 06:33 AM Share Posted 21/04/12 06:33 AM They were 22x8.5+35 fronts had a 5mm hub centric spacerLegalities aside, believe it or not it actualy drove quite nicely with them wheels, it was a very smooth freeway ride, but it did scrape on the front due to being low, a bit more camber and it wouldn't have... Also wasn't any slower in a straight line either, they were very light weight for 22's 1.5-2.5kg heavier then the factory 19's I did lots of acceleration tests and managed many sub 5 0-100km/h taking off in 2nd!those tests prove that its ok to run 22 then(just gotta find some light ones)...lol thank youI LOVE THAT LOOK..imo I dont really care if its unroadworthy and so forth,just want it to sit like batmans car..very nice stance!Looks sh*t, hence why he changed his wheels I really cant answer why he changed them buds,but that's your opinon..its hard to find a tuff set of wheels in 22's to suit an FG unless your willing to cough up 6-7k..haha not me that's for sure.I have found a set of 22"x 8.5 +35 offset all around? now can I go a wider rim with say bigger offset on the rear or is that the limit for an fg when its really low.? Link to comment Share on other sites More sharing options...
Worm A much better forum Silver Donating Members 3,808 Member For: 16y 4m 3d Gender: Male Location: Victoria Posted 23/04/12 12:01 PM Share Posted 23/04/12 12:01 PM Get these... 22 and you choose offset... 9 inches all round...http://www.koya.com.au/?cars=inox-ceo-20-22I have them in 20x10 rear and they have 5 inches of dish! It's massive :-) Link to comment Share on other sites More sharing options...
EFSIX I Lead Not Follow... Member 1,026 Member For: 12y 7m 6d Gender: Male Location: Westside,Melbourne Posted 23/04/12 02:51 PM Share Posted 23/04/12 02:51 PM hmm they look good buds but was really trying for a 5 spoke wheel,something like these:http://www.ebay.com....984.m1423.l2649 orhttp://www.ebay.com....984.m1423.l2649in 22"now picture them with graphite painted centres and white dish..?? Link to comment Share on other sites More sharing options...
Worm A much better forum Silver Donating Members 3,808 Member For: 16y 4m 3d Gender: Male Location: Victoria Posted 24/04/12 11:20 AM Share Posted 24/04/12 11:20 AM INOX wheels have removable and paintable dish. I'm thinking of getting orange to match my car... Link to comment Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,425 Member For: 14y 11m 1d Gender: Male Location: Melbourne Posted 24/04/12 12:41 PM Share Posted 24/04/12 12:41 PM wormy where are the new wheels.we are getting impatient waiting for the new set to go on!!!!!! Link to comment Share on other sites More sharing options...
Shyfrd Turboless Donating Members 5,992 Member For: 13y 8m 30d Gender: Male Location: Geelong, Victoria Posted 24/04/12 02:42 PM Share Posted 24/04/12 02:42 PM Worm? More like jd!! Easter was the target by the painter and heard nothing about them since :/ jd?? Lol Link to comment Share on other sites More sharing options...
EFSIX I Lead Not Follow... Member 1,026 Member For: 12y 7m 6d Gender: Male Location: Westside,Melbourne Posted 24/04/12 05:14 PM Share Posted 24/04/12 05:14 PM INOX wheels have removable and paintable dish. I'm thinking of getting orange to match my car...yeah I checked them out,some good choices,not too pricey either..I like!it doesnt really matter whether the two peice or not,ill just powder coat them whole then add colour to the spokes.I think that's the best way!now just to clarify if I go a 22x8.5 with a +30-35 offset 235/30/22 Front,Rear 22x9 +30-35 offset with say a 275/30/22 this would or should be ok?do I have to run any spacers? my car will sit hopefully as low as Mexican Batmans car?im also thinking of lip/rolling my gaurds,will I be able to run wider wheels? whats the limit without the tyres poking out or rubbing?thank in advance guys.. Link to comment Share on other sites More sharing options...
Pazzo Donating Members 11,132 Member For: 14y 1m 4d Gender: Male Posted 24/04/12 07:05 PM Share Posted 24/04/12 07:05 PM Saw worms wheels at the lights at Narre on Sunday morning Passed, don't think he noticed me in my Kinectic ute. Look good worm. Link to comment Share on other sites More sharing options...
Worm A much better forum Silver Donating Members 3,808 Member For: 16y 4m 3d Gender: Male Location: Victoria Posted 25/04/12 04:24 AM Share Posted 25/04/12 04:24 AM Nah... Been in a different world.Just found out a very good friend has cancer... Plus I probably had my daughter in the car with me. She never shuts up. LOL Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now