arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 24d Gender: Male Location: Perth Posted 06/09/18 02:15 AM Share Posted 06/09/18 02:15 AM +38 - +40 for the rear. 1 Link to comment Share on other sites More sharing options...
tippo499 New Member 6 Member For: 6y 3m 15d Posted 06/09/18 02:18 AM Share Posted 06/09/18 02:18 AM Awesome, would +35 or +38 clear the suspension on the front? Otherwise getting the same colour rims all around could be an issue lol Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 24d Gender: Male Location: Perth Posted 06/09/18 02:19 AM Share Posted 06/09/18 02:19 AM (edited) Doing calcs now. To clear suspension I think +25 , but if you tell be the clearance you have from the rim to the strut and your current rim size I can work it out better. Be precise. Edited 06/09/18 02:23 AM by arronm Link to comment Share on other sites More sharing options...
tippo499 New Member 6 Member For: 6y 3m 15d Posted 06/09/18 02:21 AM Share Posted 06/09/18 02:21 AM Thanks man, I would normally just go out with a tape measure but I’m about 1000km from my car Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 24d Gender: Male Location: Perth Posted 06/09/18 02:26 AM Share Posted 06/09/18 02:26 AM (edited) Forget the last bit then, lets hope others chime in with what they have fitted. The last thing you want is it to hit the strut and have to use spacers. Have you read this whole thread to see what other members with 9.5 inch front , offset is. What about 8.5 or 9 front. If you run the same size rim all round and no rubbing on the rear it needs to be 38 or 40. You cant run that on the front so need less offset , so maybe then more lip on front. Will look stupid. You will need to contact supplier and see what blanks they start with. Edited 06/09/18 02:31 AM by arronm Link to comment Share on other sites More sharing options...
tippo499 New Member 6 Member For: 6y 3m 15d Posted 06/09/18 02:31 AM Share Posted 06/09/18 02:31 AM Yeah I’ve seen one guy running 9.5” +15 all around but the rears poked a bit and the fronts looked close as. Sadly Rota only make them in 9.5” :( im thinking the +20 might be what I end up doing and then doing some trial and error with ride heights when I get coilovers Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 24d Gender: Male Location: Perth Posted 06/09/18 03:35 AM Share Posted 06/09/18 03:35 AM (edited) You need to check the front for the min offset and then run the same on the rear. Anything under +35 will rub like a bitch...on the rear Maybe you can run +25 or even +30. I dont know. Its all about the front. Edited 06/09/18 03:35 AM by arronm Link to comment Share on other sites More sharing options...
tippo499 New Member 6 Member For: 6y 3m 15d Posted 06/09/18 03:43 AM Share Posted 06/09/18 03:43 AM (edited) Yeah I’m thinking I’ll have to find a different rim with a better suited offset I know the Rotas are pretty tight with the +15 Edited 06/09/18 03:45 AM by tippo499 Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 24d Gender: Male Location: Perth Posted 06/09/18 06:14 AM Share Posted 06/09/18 06:14 AM Winrun Link to comment Share on other sites More sharing options...
bamk2f6tornado Bronze Donating Members 777 Member For: 11y 18d Gender: Male Location: Rockhampton Qld Posted 06/09/18 09:59 PM Share Posted 06/09/18 09:59 PM Yea I don't think those pics you posted are 9.5+20. I'd be going the 9.5+20 all round. They'll fit fine and might need a slight guard roll depending on how low you go and how wide the rubber you fit is Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now