arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 2m 3d Gender: Male Location: Perth Posted 21/01/18 09:20 AM Share Posted 21/01/18 09:20 AM ute?? front and rear brembo or similar Link to comment Share on other sites More sharing options...
espoig Donating Members 249 Member For: 10y 3m 25d Gender: Male Location: Mundaring Posted 22/01/18 02:08 AM Share Posted 22/01/18 02:08 AM Sedan and brembos front and back Link to comment Share on other sites More sharing options...
espoig Donating Members 249 Member For: 10y 3m 25d Gender: Male Location: Mundaring Posted 01/06/18 01:51 PM Share Posted 01/06/18 01:51 PM Any ideas, gonna order them soon @arronm Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 2m 3d Gender: Male Location: Perth Posted 02/06/18 06:43 AM Share Posted 02/06/18 06:43 AM Front will clear suspension , but you need to check if spokes clear brakes. Rear wont foul on suspension , but will probably stick out past the guard. Again you need to check spokes with brakes. I suggest a test fit before buying these wheels. 1 Link to comment Share on other sites More sharing options...
xr6666turbo Donating Members 102 Member For: 7y 6m 21d Gender: Male Location: Brisbane Posted 18/06/18 10:33 AM Share Posted 18/06/18 10:33 AM On 30/10/2017 at 6:47 PM, jabtronic said: I got 2 years 4 months and 55,000kms out of my ATR2s and there was was still more tread on em than that Anyway, for purposes of this thread 18x9.5 +10 fronts with 235/40R18 Michenlin Pilot Sport 4, these tyres don't stretch as well as I expected. 18x11 +8 rears with 265/35R18 Achilles ATR2 Front guards are rolled/pumped maybe 10-15mm further out than standard. Rears have been pushed out very little by adjustment in the wheel arch brackets but they are not yet rolled. I will need to roll them to go lower, as pictured the guards sit on the tyres with axle resting on bumpstops, raised it back up for now. The front tyres stick out slightly but this is with neutral camber. They will tuck in easily with a little negative camber. There is no scrubbing at all. mate, what brand of wheels are those, I like. Link to comment Share on other sites More sharing options...
SP94 New Member 2 Member For: 6y 5m 8d Gender: Male Location: Perth Posted 23/07/18 05:55 PM Share Posted 23/07/18 05:55 PM (edited) Hi all, I've got a couple of questions regarding a new set of wheels for my F6. I've got a set of dark argents on at the moment but I'm looking at swapping them for a set of TE37s. 19×9.0 +35 all round. Will these fit on an F6? I'm looking at upgrading to the 6 pot brembos in the future, I'm just wondering if they'll clear the brakes as well. Also, what's the most aggressive fitment you can run without rolling guards/camber? (My dark argents will be up for sale once I find a new set of wheels too!) Thanks! Edited 23/07/18 05:56 PM by SP94 Title needing to be updated Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 2m 3d Gender: Male Location: Perth Posted 24/07/18 02:06 AM Share Posted 24/07/18 02:06 AM I suggest you fit the brakes first and then trial fit wheels you like. Its not just the offset that matters, its the style and shape of the wheel spoke that can foul on the brakes. Link to comment Share on other sites More sharing options...
espoig Donating Members 249 Member For: 10y 3m 25d Gender: Male Location: Mundaring Posted 25/07/18 01:15 PM Share Posted 25/07/18 01:15 PM Te37s have massive clearance, should be fine Link to comment Share on other sites More sharing options...
Lkb97 New Member 1 Member For: 6y 4m 24d Posted 05/08/18 11:15 PM Share Posted 05/08/18 11:15 PM I’m wanting to buy a set of work gt5 rims 18x9 +30, just want to find out if these will fit properly on an fg before I buy them online, cheers Link to comment Share on other sites More sharing options...
tippo499 New Member 6 Member For: 6y 3m 24d Posted 06/09/18 01:50 AM Share Posted 06/09/18 01:50 AM Hey guys, I’m looking at getting some Rota Grid R 19x9.5 for my 2010 XR6 sedan and I’m not sure what offset to go for. I’m gonna lower the car in the near future so I wanna avoid any rubbing when I do it. The offsets I’ve been looking at are +20 +35 and +38. I’m happy to get different offsets front and rear if needed. Any help appreciated Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now