bamk2f6tornado Bronze Donating Members 777 Member For: 11y 29d Gender: Male Location: Rockhampton Qld Posted 15/03/17 05:57 AM Share Posted 15/03/17 05:57 AM I rekon that offset will be to close to your suspension. Around a +20/28 is probably more on the money. Will be able to fit more tyre with those offsets to Link to comment Share on other sites More sharing options...
wixy New Member 18 Member For: 8y 5m 28d Posted 15/04/17 11:34 PM Share Posted 15/04/17 11:34 PM (edited) I'm thinking about Mustang wheels for my white FG XR6T mk1 (replacing the centre caps with black 'Ford' ones). The sizes/offsets are 19x9in (+45 offset) front and 19x9.5in (+52.5) rear. Will this work and look ok? I don't what rims that stick out too far, prefer closer to flush or inside the guards. Are the sizes legal in Vic? (original rims are 245/35-19). Appreciate the feedback! Edited 15/04/17 11:36 PM by wixy Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 2m 5d Gender: Male Location: Perth Posted 16/04/17 12:57 AM Share Posted 16/04/17 12:57 AM Won't fit. Offset to large. Link to comment Share on other sites More sharing options...
wixy New Member 18 Member For: 8y 5m 28d Posted 16/04/17 05:23 AM Share Posted 16/04/17 05:23 AM Bugger, thanks! Link to comment Share on other sites More sharing options...
PSIFRK Member 312 Member For: 17y 11m 23d Gender: Male Location: Brisbane Posted 18/04/17 11:25 AM Share Posted 18/04/17 11:25 AM Will a 20x10.5 fit on the rear of a fgx g6e? Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,086 Member For: 16y 8m 22d Gender: Male Location: Melbourne Posted 18/04/17 11:26 AM Share Posted 18/04/17 11:26 AM unlikely... needs specific offset Link to comment Share on other sites More sharing options...
PSIFRK Member 312 Member For: 17y 11m 23d Gender: Male Location: Brisbane Posted 18/04/17 11:35 AM Share Posted 18/04/17 11:35 AM The wheels im looking make to the offset I want but only come in 20x9 or 20x10.5 and I think 9 rears look small/skinny Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,086 Member For: 16y 8m 22d Gender: Male Location: Melbourne Posted 18/04/17 11:37 AM Share Posted 18/04/17 11:37 AM chuck the details in here and see how you go -> www.willtheyfit.com Link to comment Share on other sites More sharing options...
.Stripes. All stock bar the k&n panel filter Silver Donating Members 8,061 Member For: 12y 9m 19d Gender: Male Location: Perth Posted 20/04/17 12:21 AM Share Posted 20/04/17 12:21 AM Without modifying your rear control blades and/or going some serious stretch you'd be pushing it. Link to comment Share on other sites More sharing options...
camo86T Silver Donating Members 1,810 Member For: 10y 10m 20d Gender: Male Location: SW Sydney Posted 07/06/17 05:00 AM Share Posted 07/06/17 05:00 AM Looking at getting some work kiwami rims, unsure yet on 18s or 19s Things I want: Decent fit and width front and back The above without having to roll/pump guards front or back So it's an FG ute, currently std front height, will fit SLs sometime but iirc they're only 10~15mm lower anyway; SSL rear but will have leaves reset somewhere between SL and SSL height depending on how the front turns out. Brakes are just std FG 322mm front so no issues there. Been trawling through this thread and a few others, general consensus seems that 8.5 +25 is a good flush fit for the front of an FG If I was to translate that to a 9.5, +38 will give the same fit on the outside, will the inner be an issue though? Will +30 work or be starting to poke? @bamk2f6tornado I know you've got 19x9.5+22 front and 19x10.5+22 rear on your BA, suspect you've done some guard work though, nor do I know how B series compare to FG. Rear I'd like to chuck a 10.5 under, can get up to +32 in 19 but max +22 in 18, will that fit under bulgy FG ute arse ok? Tyres will be most likely 255 on the front and 275 or 285 on the back. Getting fussy now, but is understeer a potential issue with say 9.5+30/38 front 10.5+22 rear? Cheers for any input blokes. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now