k31th less WHY; more WOT Site Developer 28,996 Member For: 16y 7m 17d Gender: Male Location: Melbourne Posted 09/06/16 02:48 AM Share Posted 09/06/16 02:48 AM #onceirunanine Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 6m 2d Gender: Male Location: NOR Perth Posted 09/06/16 02:56 AM Share Posted 09/06/16 02:56 AM my major question now is how are you fitting 17x10+38 without hitting bolt or control blade??? lol and like the comment about running 9s 18x9+29 below....I think needs 10mm more poke on front for more flush (that pic is stock height and would tuck a tiny bit depending on how low you went and how much negative camber you wanna run - I stick to OEM with -0.5*). Some are content with a bit of tuck....will look sweet either way. Did they give you any indication on wheel weight and kg load rating? For the coin you're spending, Advan also make quality lightweight forged wheels too hahaha wish I had that budget to play with wheels lol and I hear ya about decisions....you should factor in a few hundred for opticoat or similar...personally im a fan of darker colour wheels so matte grey is my vote. I'd also be doing the typical black/white theme I.e. panda eyes black, rear diffuser black and roof wrapped black. Link to comment Share on other sites More sharing options...
.Stripes. All stock bar the k&n panel filter Silver Donating Members 8,061 Member For: 12y 8m 14d Gender: Male Location: Perth Posted 09/06/16 03:12 AM Share Posted 09/06/16 03:12 AM 3 hours ago, PTR_NITRO_FG said: ...but needed rear spacer mod apparently (im guessing the 295s might rub control blade). Correct. 10mm control blade spacer and all good from a rubbing perspective. Does present engineering issues if you don't offset the bush ring to compensate, though. Link to comment Share on other sites More sharing options...
Trav199 Member 126 Member For: 13y 10m 10d Posted 09/06/16 03:24 AM Share Posted 09/06/16 03:24 AM haha its got the power there to run a 9 and the driveline.. has been a 10.3 on less power and in December. Which I hot in central QLD. haha with 17x10 +38 one needs to put their big boy pants on and get the grinder out haha didnt take much but they do fit... just... +29 looks like it would suit my needs! hes going to get back to me on wheel weight once I decide wheel size. not sure on load rating either. ill find that out before purchase. think ill go with gunmetal grey with polished lip 1 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,996 Member For: 16y 7m 17d Gender: Male Location: Melbourne Posted 09/06/16 03:26 AM Share Posted 09/06/16 03:26 AM 1 minute ago, Trav199 said: its got the power there to run a 9 and the driveline.. has been a 10.3 on less power Gonna need pics + details Link to comment Share on other sites More sharing options...
Trav199 Member 126 Member For: 13y 10m 10d Posted 09/06/16 03:37 AM Share Posted 09/06/16 03:37 AM built motor/zf gtx4298 all the usual supporting mods.. 850rwkw on 33psi. normally run it on 750rwkw at 24psi.. Reason for different rims on dyno is they are nice wide but really old hard tyres. 3 Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 6m 23d Gender: Male Location: Central Coast Posted 09/06/16 05:19 AM Share Posted 09/06/16 05:19 AM Just a casual.9 Link to comment Share on other sites More sharing options...
barnz Member 3,047 Member For: 11y 7d Gender: Male Location: Brisbane Posted 09/06/16 05:35 AM Share Posted 09/06/16 05:35 AM casual 750kw on "low boost" 2 Link to comment Share on other sites More sharing options...
Trav199 Member 126 Member For: 13y 10m 10d Posted 09/06/16 07:23 AM Share Posted 09/06/16 07:23 AM edit I ment rwhp!! haha I wish it had that much Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 6m 23d Gender: Male Location: Central Coast Posted 09/06/16 07:33 AM Share Posted 09/06/16 07:33 AM You're Australian, be an Australian! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now