Lennox Member 2,586 Member For: 11y 9m 27d Gender: Male Location: Perth Posted 18/11/15 11:47 PM Share Posted 18/11/15 11:47 PM Imo it makes it turn in a little worse, doesn't seem as sharp to turn in (this is compared to stock 17" 245 45 17) Probably gives more grip mid corner haven't done a proper comparison though nor do I have the skills or track time I've always struggled with the understeer of the thing 1 Link to comment Share on other sites More sharing options...
bonoxr New Member 3 Member For: 12y 10m 28d Posted 19/11/15 07:51 AM Share Posted 19/11/15 07:51 AM (edited) mine sit around 15mm out from the guard, and never had drama, just make sure the tyre sneaks under... Yeah that's the thing I'm not sure of, if the 275 width will make the tyre poke. If it was a smaller tyre and had some stretch it'd be perfect I think!Looks pretty mint PTR! Haha Edited 19/11/15 07:52 AM by bonoxr Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 7m 22d Gender: Male Location: Western Sydney Posted 19/11/15 10:33 AM Share Posted 19/11/15 10:33 AM Looking at a set of 18's for my ute ATM.Fronts are 18x9 +35Rears at 18x10 +38Definitely going to get them but I'm hoping to fit 255/40R18 for the fronts and 295/35R18 for the rears.Any ideas on how the front will fit up? Looks like it'll be close to the upright going by will they fit. Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 6m 28d Gender: Male Location: NOR Perth Posted 19/11/15 01:34 PM Share Posted 19/11/15 01:34 PM I test fitted some "drag" rims on the front when I took the above pic.Its 18x9 +35 with a 265/35/18. Tyres f*cked and a little flat (and sidewall was a little buldgy)...but it JUST hit the control arm as I spun it.So my guess is your fronts will be very close...like 5mm or less from rim touching....but cause 255 you might get lucky. Still think it may hit going over big bumps and stuff....Guess you'll let us know when it happens 1 Link to comment Share on other sites More sharing options...
Jamie_d Member 219 Member For: 9y 8m 14d Gender: Male Location: Wadalba 2259 NSW Posted 23/11/15 12:57 AM Share Posted 23/11/15 12:57 AM Ok I've been reading heaps but I want to make sure I have things right. Looking at either vertini rf1 which are easily available and look awesome I just wasn't really looking to go to 20s or I'm looking at 57dr gram lights. 18 x 8.5 +38 is an easy fit size all round on fg sedan right? Thanks guys. Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 6m 28d Gender: Male Location: NOR Perth Posted 23/11/15 01:48 AM Share Posted 23/11/15 01:48 AM Yes very easily. Will poke an extra 4mm from OEM 18s....so safe as houses as they say lol Link to comment Share on other sites More sharing options...
Jamie_d Member 219 Member For: 9y 8m 14d Gender: Male Location: Wadalba 2259 NSW Posted 23/11/15 01:52 AM Share Posted 23/11/15 01:52 AM Yay jamie do good haha. Now I just have to decide. I really want 18s but the vertini are very nice looking. Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 6m 28d Gender: Male Location: NOR Perth Posted 23/11/15 02:01 AM Share Posted 23/11/15 02:01 AM I prefer 18s cause comfort and extra sidewall for better grip (and I think cornering too?).19s feel a little rough and haven't tried 20s before...but tyre choice is also limited the higher the size you go. Ok....back to work for me Link to comment Share on other sites More sharing options...
Jamie_d Member 219 Member For: 9y 8m 14d Gender: Male Location: Wadalba 2259 NSW Posted 23/11/15 11:00 AM Share Posted 23/11/15 11:00 AM Ok after reading in spare time all day I think I've ruled out 20s. I don't care about ride comfort but I like grip and tyre choice seems very limited in 20. Thanks for the quick reply earlier Peter I figured you would be the one to jump on that haha. Now to order some 58dr's from America cos Australian distributor says 5 month wait till shipment haha 1 Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 7m 22d Gender: Male Location: Western Sydney Posted 28/11/15 11:16 AM Share Posted 28/11/15 11:16 AM (edited) So it turns out that the versus raceforge2 18x9 +35 doesn't clear brembos up front even though a few places advertise them as brembo compatible.So I got a set of XXR550s, 8.75 +36 & 9.75 +36 with 255/40r18 & 295/35r18. Clears brembos and has decent fit on the fg ute, no guard work needed.Pics after AFD tomorrow. Edited 28/11/15 11:16 AM by OZYWALKER Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now