Jump to content

Fg Offsets And Tyre Questions


Dillz

Recommended Posts

  • Member
  • Member For: 11y 2d
  • Gender: Male
  • Location: Brisbane

?? Wouldnt think the front would be that much different. If that measurement was from the "top"(its round I know...) of the rim the difference could be camber. If its from the bottom closest to the ground perhaps the whole subframe needs to be shifted, not sure if you would be able to get 10mm of shift though.

Link to comment
Share on other sites

  • New Member
  • Member For: 12y 9m 28d

Looking at putting some 19x8.5 +22 fronts & 19x9.5 +22 rear (275/35/19) Enkei GTC01's on my fg sedan. Wondering if anyone has some re-assurance/guidance about the rears before I go and test fit them? Only on SSL's all round so its not ridiculously low but not a 4x4 either..

Edited by bonoxr
Link to comment
Share on other sites

  • Donating Members
  • Member For: 11y 5m 28d
  • Gender: Male
  • Location: NOR Perth

On stock height....rears would be 10-15mm or so past the gaurd. With SSL im sure it would tuck it a little bit more.

I rekon it will be close....just roll the gaurds if you get into trouble

Link to comment
Share on other sites

  • Member
  • Member For: 14y 8m 16d
  • Gender: Male
  • Location: perth

you don't gain to much by rolling the rear guards (fg sedan) but you can flare them, in saying that 19x9.5+22 will fit with >10mm of poke

19x8.5+22 will be flush to the guard

Link to comment
Share on other sites

  • New Member
  • Member For: 12y 9m 28d

Cheers for the replies & info. Unsure if I'll go ahead with them - don't think I I can be bothered with getting guards flared etc just to get them to be flush.. Would it attract attention from the boys in blue with 10mm of poke?

Edit: I know 10mm is F*ck all but can't be bothered with cops lol

Edited by bonoxr
Link to comment
Share on other sites

  • Donating Members
  • Member For: 11y 5m 28d
  • Gender: Male
  • Location: NOR Perth

^^ just plead ignorance and say the rims were put on by previous owner

If I get caught....ill just pretend I thought it was normal....cause of all the jap cars and what not lol

you don't gain to much by rolling the rear guards

Dang....how much did you get? Or are yours flared?

I was hoping 10mm ... but guessing that's optimistic

Edited by PTR_NITRO_FG
Link to comment
Share on other sites

  • Member
  • Member For: 14y 8m 16d
  • Gender: Male
  • Location: perth
bonoxr, on 17 Nov 2015 - 8:14 PM, said:

Cheers for the replies & info. Unsure if I'll go ahead with them - don't think I I can be bothered with getting guards flared etc just to get them to be flush.. Would it attract attention from the boys in blue with 10mm of poke?

Edit: I know 10mm is F*ck all but can't be bothered with cops lol

mine sit around 15mm out from the guard, and never had drama, just make sure the tyre sneaks under...

PTR_NITRO_FG, on 17 Nov 2015 - 9:18 PM, said:

^^ just plead ignorance and say the rims were put on by previous owner

If I get caught....ill just pretend I thought it was normal....cause of all the jap cars and what not lol

Dang....how much did you get? Or are yours flared?

I was hoping 10mm ... but guessing that's optimistic

[/quo

.

I flared mine, just so I could get the R888's on my rims, I got 15mm without much sweat at all..

Edited by mummba
Link to comment
Share on other sites

  • Donating Members
  • Member For: 11y 5m 28d
  • Gender: Male
  • Location: NOR Perth

694c8726d6ad30ec77f072c33b37099e.jpg

Fronts with 265s lol she'll be right bro

Once I lower might tuck a little bit

Rears should be a tiny bit less agressive, see what happens....

Who did you use to pump? I've been told by a nerd on here that Des @ Auto FX is the rolling king.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'