barnz Member 3,047 Member For: 10y 9m 30d Gender: Male Location: Brisbane Posted 13/11/15 03:15 AM Share Posted 13/11/15 03:15 AM ?? Wouldnt think the front would be that much different. If that measurement was from the "top"(its round I know...) of the rim the difference could be camber. If its from the bottom closest to the ground perhaps the whole subframe needs to be shifted, not sure if you would be able to get 10mm of shift though. Link to comment Share on other sites More sharing options...
bonoxr New Member 3 Member For: 12y 7m 25d Posted 16/11/15 01:08 PM Share Posted 16/11/15 01:08 PM (edited) Looking at putting some 19x8.5 +22 fronts & 19x9.5 +22 rear (275/35/19) Enkei GTC01's on my fg sedan. Wondering if anyone has some re-assurance/guidance about the rears before I go and test fit them? Only on SSL's all round so its not ridiculously low but not a 4x4 either.. Edited 16/11/15 01:13 PM by bonoxr Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 3m 25d Gender: Male Location: NOR Perth Posted 16/11/15 02:03 PM Share Posted 16/11/15 02:03 PM On stock height....rears would be 10-15mm or so past the gaurd. With SSL im sure it would tuck it a little bit more.I rekon it will be close....just roll the gaurds if you get into trouble Link to comment Share on other sites More sharing options...
mummba Member 525 Member For: 14y 6m 14d Gender: Male Location: perth Posted 17/11/15 11:38 AM Share Posted 17/11/15 11:38 AM you don't gain to much by rolling the rear guards (fg sedan) but you can flare them, in saying that 19x9.5+22 will fit with >10mm of poke19x8.5+22 will be flush to the guard Link to comment Share on other sites More sharing options...
bonoxr New Member 3 Member For: 12y 7m 25d Posted 17/11/15 12:14 PM Share Posted 17/11/15 12:14 PM (edited) Cheers for the replies & info. Unsure if I'll go ahead with them - don't think I I can be bothered with getting guards flared etc just to get them to be flush.. Would it attract attention from the boys in blue with 10mm of poke?Edit: I know 10mm is F*ck all but can't be bothered with cops lol Edited 17/11/15 12:16 PM by bonoxr Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 3m 25d Gender: Male Location: NOR Perth Posted 17/11/15 01:18 PM Share Posted 17/11/15 01:18 PM (edited) ^^ just plead ignorance and say the rims were put on by previous owner If I get caught....ill just pretend I thought it was normal....cause of all the jap cars and what not lolyou don't gain to much by rolling the rear guardsDang....how much did you get? Or are yours flared? I was hoping 10mm ... but guessing that's optimistic Edited 17/11/15 01:21 PM by PTR_NITRO_FG Link to comment Share on other sites More sharing options...
mummba Member 525 Member For: 14y 6m 14d Gender: Male Location: perth Posted 18/11/15 11:47 AM Share Posted 18/11/15 11:47 AM (edited) bonoxr, on 17 Nov 2015 - 8:14 PM, said:Cheers for the replies & info. Unsure if I'll go ahead with them - don't think I I can be bothered with getting guards flared etc just to get them to be flush.. Would it attract attention from the boys in blue with 10mm of poke?Edit: I know 10mm is F*ck all but can't be bothered with cops lolmine sit around 15mm out from the guard, and never had drama, just make sure the tyre sneaks under...PTR_NITRO_FG, on 17 Nov 2015 - 9:18 PM, said:^^ just plead ignorance and say the rims were put on by previous owner If I get caught....ill just pretend I thought it was normal....cause of all the jap cars and what not lolDang....how much did you get? Or are yours flared?I was hoping 10mm ... but guessing that's optimistic [/quo.I flared mine, just so I could get the R888's on my rims, I got 15mm without much sweat at all.. Edited 18/11/15 11:49 AM by mummba Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 3m 25d Gender: Male Location: NOR Perth Posted 18/11/15 12:43 PM Share Posted 18/11/15 12:43 PM Fronts with 265s lol she'll be right bro Once I lower might tuck a little bit Rears should be a tiny bit less agressive, see what happens....Who did you use to pump? I've been told by a nerd on here that Des @ Auto FX is the rolling king. Link to comment Share on other sites More sharing options...
Lennox Member 2,586 Member For: 11y 6m 24d Gender: Male Location: Perth Posted 18/11/15 10:25 PM Share Posted 18/11/15 10:25 PM 265 on the front make the steering pretty heavy. I'm gonna get a bit narrower tyres for the front next time Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 3m 25d Gender: Male Location: NOR Perth Posted 18/11/15 11:31 PM Share Posted 18/11/15 11:31 PM You rekon? I was hoping it would provide more turn in grip....Wasn't 100% whether it would help understeer or make it worse Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now