FIXR7 Member 116 Member For: 14y 6m Gender: Male Location: Perth Posted 11/05/15 04:41 AM Share Posted 11/05/15 04:41 AM Check this out TomT.http://www.ssr-wheels.com/ Link to comment Share on other sites More sharing options...
TomT Spooling Member Donating Members 961 Member For: 12y 11m 19d Gender: Male Location: Blue Mountains, NSW Posted 11/05/15 06:33 AM Share Posted 11/05/15 06:33 AM You Sir, are a legend.Now my picks are between:SSR GTF01:18x8.5 + 32 front18x9.5 + 40 rear~$870 per wheelSSR GTV01:18x8.5 +30 front18x9.5 +35 rear~$470 Having trouble finding the reason for the difference in cost on the mobile site Link to comment Share on other sites More sharing options...
Seaton Donating Members 537 Member For: 12y 2m 29d Gender: Male Location: Sydney Posted 11/05/15 08:40 AM Share Posted 11/05/15 08:40 AM (edited) GTF01 is a forged wheel. The GTV01 is not. Edited 11/05/15 08:49 AM by Seaton Link to comment Share on other sites More sharing options...
TomT Spooling Member Donating Members 961 Member For: 12y 11m 19d Gender: Male Location: Blue Mountains, NSW Posted 11/05/15 08:49 AM Share Posted 11/05/15 08:49 AM Just messaged JDMconcepts who are the distributor for SSR and all those offsets for f01 and v01 are discontinued :(Back to making the GT5s fit... 18x10+38.. who can give me their wheel specs and how much clearance they have to guard/strut? Can space the blade in but can't roll the guards much in FG apparently.. Link to comment Share on other sites More sharing options...
vxr50t Member 134 Member For: 11y 7m 14d Posted 11/05/15 09:54 AM Share Posted 11/05/15 09:54 AM I reckon you can make em fit Tom but you'll def need to run a 5mm spacer to make the rears clear the trailing arm which will make them +33These are how mine looked when I was moving some weights for a mate and had the boot fully loaded. It had about 2mm clearance between the tyre and guard and bear in mind the tyre is bigger than a std 285I reckon with 275s they'll fit perfect even if they're oversized 275sAlso, is your car lowered? Link to comment Share on other sites More sharing options...
TomT Spooling Member Donating Members 961 Member For: 12y 11m 19d Gender: Male Location: Blue Mountains, NSW Posted 11/05/15 10:32 AM Share Posted 11/05/15 10:32 AM I can use a spacer to inset the control blade rather than a hub spacer so I don't lose any guard clearance. It's on Shockworks coilovers, haven't set everything up yet so height will depend on wheels, not an issue Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 1m 6d Posted 11/05/15 11:30 AM Share Posted 11/05/15 11:30 AM The control blade spacer won't change things because its the 'knuckle' on the hub that is the problem and a spacer won't move thatEveryone says there is no room to move with FG guards but this is a lie. I got at least 10mm more clearance from rolling and pumping my guards, and that wasn't pushing them too far 1 Link to comment Share on other sites More sharing options...
TomT Spooling Member Donating Members 961 Member For: 12y 11m 19d Gender: Male Location: Blue Mountains, NSW Posted 11/05/15 11:32 AM Share Posted 11/05/15 11:32 AM Ahh I see ^Must only be with 19/20 inch that trick works Link to comment Share on other sites More sharing options...
FIXR7 Member 116 Member For: 14y 6m Gender: Male Location: Perth Posted 12/05/15 01:18 AM Share Posted 12/05/15 01:18 AM Just messaged JDMconcepts who are the distributor for SSR and all those offsets for f01 and v01 are discontinued :(Back to making the GT5s fit... 18x10+38.. who can give me their wheel specs and how much clearance they have to guard/strut?Can space the blade in but can't roll the guards much in FG apparently..Do they really mean that they won't buy them at that offset or that SSR actually don't make them that way anymore?I had similar conversations with other wheel "Distributors" and they basically lie and say that wheel manufacturer X doesn't make them anymore. only to find they do when I contacted the manufacturer or overseas Distributor. Link to comment Share on other sites More sharing options...
FIXR7 Member 116 Member For: 14y 6m Gender: Male Location: Perth Posted 12/05/15 03:42 AM Share Posted 12/05/15 03:42 AM Hey Tom, Do particularly want a 10" rim or will a 9.5" suffice? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now