FIXR7 Member 116 Member For: 14y 6m Gender: Male Location: Perth Posted 07/10/14 01:43 AM Share Posted 07/10/14 01:43 AM Punching your 9.5" -15 into the calculator brings up 70.1mm more poke than stock!?That would suggest I could easily use a 10" +10 which gives 51.4 poke and not necessarily have to roll my guards? Or did you have to pump and roll yours to get it to fit? Link to comment Share on other sites More sharing options...
mummba Member 525 Member For: 14y 8m 19d Gender: Male Location: perth Posted 07/10/14 08:38 AM Share Posted 07/10/14 08:38 AM if you measure your stock wheels to the out side of the guard you will there is enough room for a midget family to live.. the offset they used is so retarded it looks like a massive mistake... I rolled my guards to fit that spec, which fit pretty easy, I later pumped them to see how much bigger I could go... but yeh I was running quite a bit more rolling track than standard haha Link to comment Share on other sites More sharing options...
FIXR7 Member 116 Member For: 14y 6m Gender: Male Location: Perth Posted 07/10/14 11:09 AM Share Posted 07/10/14 11:09 AM Thanks Mummba,Yes I have measured and I don't get 50mm. I get 33mm rear and about 31mm front which are already pretty well rolled stock. Of course if the rears were rolled, that would probably give close to 50mm. I'm worried about doing that because I don't want cracked paint. Link to comment Share on other sites More sharing options...
phatf6 New Member 18 Member For: 12y 22d Gender: Male Location: Sydney Posted 08/10/14 11:19 AM Share Posted 08/10/14 11:19 AM Anyone had any success with 18x11 +20 or +25 on the rear of a sedan. Keen to do guard work if need be. Link to comment Share on other sites More sharing options...
mummba Member 525 Member For: 14y 8m 19d Gender: Male Location: perth Posted 09/10/14 03:32 AM Share Posted 09/10/14 03:32 AM ^^ would be quite easy to get them to fit if you like poke, the inside guard would be your restriction,I have just rolled and flared mine a good 10-12mm, and there is still more left in the guardsyou could also run a semi stretched tyre Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 29d Gender: Male Location: Perth Posted 09/10/14 04:16 AM Share Posted 09/10/14 04:16 AM YEH 1 Link to comment Share on other sites More sharing options...
.Stripes. All stock bar the k&n panel filter Silver Donating Members 8,061 Member For: 12y 8m 12d Gender: Male Location: Perth Posted 09/10/14 04:22 AM Share Posted 09/10/14 04:22 AM ^^^that is ridiculous! Link to comment Share on other sites More sharing options...
Steven87 Member 109 Member For: 12y 11m 21d Gender: Male Location: Westside Posted 01/11/14 11:56 PM Share Posted 01/11/14 11:56 PM I found a set of 19x10.5 +12 front and rear te37How would that go on my fg xr6tWill I need to roll the guards. How much would it stick out at the front. Btw I haven't lowered my car yet Link to comment Share on other sites More sharing options...
Pazzo Donating Members 11,132 Member For: 14y 1m 3d Gender: Male Posted 02/11/14 03:16 AM Share Posted 02/11/14 03:16 AM No won't fit, I actually went and tried them on. There for sale on Gumtree cheap. Poke at the front was massive. Link to comment Share on other sites More sharing options...
mummba Member 525 Member For: 14y 8m 19d Gender: Male Location: perth Posted 02/11/14 05:52 AM Share Posted 02/11/14 05:52 AM ^^^^ pics?? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now