deshi Member 7 Member For: 12y 1m 1d Posted 16/10/13 12:29 AM Share Posted 16/10/13 12:29 AM phatf6 the wheels are 1.1.2 varrstoen wheels Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/228/#findComment-1433658 Share on other sites More sharing options...
fletty Member 191 Member For: 13y 1m 30d Gender: Male Posted 25/10/13 10:19 AM Share Posted 25/10/13 10:19 AM After numerous post's in this thread and others. I finally got some wheels.. ***LOTS OF PICS ***Ended up with what I originally wanted when I first bought my car, varrstoen 2.2.2's 19x9.5 +22 all roundFitted the rears up, Poked about 3mm on the top (was hard to get it accurate but with no tyres)Fronts followed, due to how low it sits there is heaps of camber so they tucked in about 5mm at the topTyres were fitted. 245/35 Federel 595 EVO's all roundFronts had heaps of clearance, rears however caused an issue under load..Borrowed a gaurd roller and spent the afternoon perfecting the rearsI knew that just rolling them might no give me the clearance I needed, so I decided to pump them also, they are pumped about 5mm, You can see the new body line about an inch and a half between the rear bumper and rear gaurd joinSame angle as before, Heaps of clearance nowSits nice now, fronts could do with a 5mm spacer but at the moment im happy with the fitmentShould also note I have xsport coilovers. 2 Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/228/#findComment-1435926 Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 7m 3d Gender: Male Location: Perth, WA Posted 26/10/13 02:15 AM Share Posted 26/10/13 02:15 AM (edited) Any pictures of the entire car?Should have left the rear dust plates on to hide those rusty rotors Edited 26/10/13 02:15 AM by XtRmn8 Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/228/#findComment-1436016 Share on other sites More sharing options...
vxr50t Member 134 Member For: 12y 13d Posted 26/10/13 01:53 PM Share Posted 26/10/13 01:53 PM (edited) Yeah paint the rotor hats the rust don't look good. dunno why ford skimped on painting the rear rotors. Would've been cheaper than the dust coverLooks good btw Edited 26/10/13 01:53 PM by vxr50t 1 Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/228/#findComment-1436146 Share on other sites More sharing options...
dylonseton Inactive Members 1 Member For: 11y 5m 27d Posted 29/10/13 06:00 AM Share Posted 29/10/13 06:00 AM I have a fg xr6 turbo and I am running 20by10 +42 on the rear am I able to lower it on sssl ? Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/228/#findComment-1436821 Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 7m 3d Gender: Male Location: Perth, WA Posted 29/10/13 08:29 AM Share Posted 29/10/13 08:29 AM I am running a 20x10 +40 with 275/30 rubber on SSL and not even close to rubbing. Even with two in people in the back (SSSL height), still no rubbing.I think I am lucky in a way that the tyres (ATR 2s) are pretty narrow for a 275 and have a bit of stretch on the 10inch rim. If the tyres sat more "square", guards would need to be rolled. Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/228/#findComment-1436871 Share on other sites More sharing options...
fletty Member 191 Member For: 13y 1m 30d Gender: Male Posted 04/11/13 12:31 AM Share Posted 04/11/13 12:31 AM Any pictures of the entire car?Should have left the rear dust plates on to hide those rusty rotors Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/228/#findComment-1437990 Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 7m 3d Gender: Male Location: Perth, WA Posted 04/11/13 01:10 AM Share Posted 04/11/13 01:10 AM ^^^Winning! Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/228/#findComment-1437996 Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 6m 6d Posted 04/11/13 11:52 AM Share Posted 04/11/13 11:52 AM Nailed it Fletty! Any reason you didn't go 10.5 rears? Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/228/#findComment-1438127 Share on other sites More sharing options...
Lennox Member 2,586 Member For: 12y 1m 30d Gender: Male Location: Perth Posted 06/11/13 10:20 PM Share Posted 06/11/13 10:20 PM Hey experts will 18" x 9" rims with 265 tyres fit an fg all round? Changing to ssl kings soon as well. Cheers Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/228/#findComment-1438537 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now