scorsto Member 40 Member For: 16y 1m 11d Posted 18/09/13 08:29 PM Share Posted 18/09/13 08:29 PM 20 x 9 and 35 offset will be touch and go on the front. Will most likely hit on the inside. Would be ok on the back. This is a link to my 20x9 +32 with the same tyre you have.Thanks mate did you end up running a 3-5mm spacer or downsize the tyreCheers Link to comment Share on other sites More sharing options...
evo Member 33 Member For: 12y 11m 25d Gender: Male Location: East Suburbs, VIC Posted 23/09/13 11:23 AM Share Posted 23/09/13 11:23 AM 20x9+18 - king spring front springs ssl20x10 +18 - king spring ssl leafs and 1" block in rear (rear guards been pumped slightly so could fit 15mm spacers) Link to comment Share on other sites More sharing options...
jgbender Member 4 Member For: 11y 1m 19d Gender: Male Location: Bundaberg Posted 25/09/13 03:17 AM Share Posted 25/09/13 03:17 AM (edited) I know this have been answered before but I just read through all the posts and now im confused. I know you can make 18x9.5 or 19x9.5 wheels fit the fg all around. but what offsets should they be to fit the front with a stretched tyre? id like all four tyres pretty flush to edge. car is not lowered. Edited 25/09/13 03:18 AM by jgbender Link to comment Share on other sites More sharing options...
FIXR7 Member 116 Member For: 14y 5m 19d Gender: Male Location: Perth Posted 25/09/13 05:17 AM Share Posted 25/09/13 05:17 AM 20x9+18 - king spring front springs ssl20x10 +18 - king spring ssl leafs and 1" block in rear (rear guards been pumped slightly so could fit 15mm spacers)So if you left em at +18 with no spacers you'd have no trouble with clearance on the rear when dumped? Interesting thanks evo. Link to comment Share on other sites More sharing options...
evo Member 33 Member For: 12y 11m 25d Gender: Male Location: East Suburbs, VIC Posted 25/09/13 05:28 AM Share Posted 25/09/13 05:28 AM So if you left em at +18 with no spacers you'd have no trouble with clearance on the rear when dumped? Interesting thanks evo.That's correct mate, got plenty of clearance with no spacers and guard pump.The fronts scrub on bumps though, may need skinner front tyres, currently have 245/35/20 on front. Link to comment Share on other sites More sharing options...
jgbender Member 4 Member For: 11y 1m 19d Gender: Male Location: Bundaberg Posted 25/09/13 06:45 AM Share Posted 25/09/13 06:45 AM will 18x9.5+20 fit the front of the fg with a stretched tyre no problem? Link to comment Share on other sites More sharing options...
evo Member 33 Member For: 12y 11m 25d Gender: Male Location: East Suburbs, VIC Posted 27/09/13 01:33 PM Share Posted 27/09/13 01:33 PM It will but depends how low the front is, if its low it will probably rub the guard on every bump Link to comment Share on other sites More sharing options...
mummba Member 525 Member For: 14y 8m 7d Gender: Male Location: perth Posted 27/09/13 10:41 PM Share Posted 27/09/13 10:41 PM (edited) will fit easily, especially with a stretched tyre...18s have room to play with in tyre selection to get them behind the guards as apposed to 20's Edited 27/09/13 10:44 PM by mummba 1 Link to comment Share on other sites More sharing options...
bjwortley Member 80 Member For: 11y 5m 29d Posted 01/10/13 11:46 PM Share Posted 01/10/13 11:46 PM Firstly, sorry guys I'm sure this has been asked and I would look through the past threads but I need to order today, bit of a rushFg f6 ute20 x 8.5 front20 x 10 rearI'm after the most flush/filled out guard look possible without having to roll or pump the guardsWhat is my best choice for a custom off set?I can get between +30 down to +15 on, but he said the +15 probably would need guards rolledStock height at the moment but want to lower ASAP not stupid low but a tough stanceThanks heaps in advance! Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 24d Posted 01/10/13 11:56 PM Share Posted 01/10/13 11:56 PM You won't get flush unless you roll guards. In the front with ssl springs and rolled guards you'll get +20 with a 245/35 tyre and that's flush!Same goes for the rear, you'd need rolled guards. If you remove the support and pump the guards properly I think you can get away with +20 offset aswell! Someone confirm the rears though cause I don't know utes that well Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now