towsw001 Member 67 Member For: 12y 5m 26d Gender: Male Location: Adelaide Posted 04/07/13 06:05 AM Share Posted 04/07/13 06:05 AM Fark those wheels look good. If +40 with 20x10s only just need the guards rolled on the rear then 8.5s will be fine. However he has +20s on the front, anyone confirm that +40s front and back will be fine?Sorry for probably a repeated post. I will source the forum a bit more now...Samokay spoke to a couple of wheel shopsConsensus ive come to is to run 20x8.5 + 40 all around with 245/35/20. Rear should be fine especially with 8.5. The front will be very close the rubbing on the inside. This may be reduced by running a 30mm profile tyre rather than a 35mm or by using a spacer (5mm max reccommended). Could go a +20 on the front however guards will probably need rollled. Unfortunately the wheels I want only come in a +20 or +40. Does this sound about right? Anyone run a 35mm profile with a +40 offset on the front?Still searching this dreaded thread... Link to comment Share on other sites More sharing options...
FIXR7 Member 116 Member For: 14y 5m 20d Gender: Male Location: Perth Posted 04/07/13 07:36 AM Share Posted 04/07/13 07:36 AM I assume you mean "%" when you say "mm" for the profile? Are you not going to use at least a 9.5" for the rear? Link to comment Share on other sites More sharing options...
Pazzo Donating Members 11,132 Member For: 14y 23d Gender: Male Posted 04/07/13 08:08 AM Share Posted 04/07/13 08:08 AM + 40 front will sit way to much inside the gaurd.. Go for between +25 to +35 for front. Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 7m 25d Gender: Male Location: Vic Posted 04/07/13 08:19 AM Share Posted 04/07/13 08:19 AM Go the +20. Can run a 245 easy. +20 all round. Link to comment Share on other sites More sharing options...
fr33r Donating Members 92 Member For: 12y 2m 26d Gender: Male Location: Riverina NSW Posted 04/07/13 11:34 AM Share Posted 04/07/13 11:34 AM + 40 front will sit way to much inside the gaurd.. Go for between +25 to +35 for front.Go the +20. Can run a 245 easy.+20 all round.^^^ this and this.+40 will be too close on the inside.this is a pic of 245 slightly stretched on 20x9 +32.20x8.5 +40 will be closer than this... Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 25d Posted 04/07/13 12:19 PM Share Posted 04/07/13 12:19 PM I have 20x8.5 +42 and run a 245/35 but I have a 5mm spacer. Cars apart so ill try for the wheel with spacer off n see whether a +40 would work but highly doubt it. 245/35 will.As for +20 you can't run a 245/35 if you go too low. Max ssl up front.I would go +40 all round with 5mm spacer up front if you want to be safeOr +20 all round if you go ssl/sssl and roll rears 1 Link to comment Share on other sites More sharing options...
mummba Member 525 Member For: 14y 8m 8d Gender: Male Location: perth Posted 04/07/13 12:22 PM Share Posted 04/07/13 12:22 PM I have 20x8.5 +42 and run a 245/35 but I have a 5mm spacer. Cars apart so ill try for the wheel with spacer off n see whether a +40 would work but highly doubt it. 245/35 will.As for +20 you can't run a 245/35 if you go too low. Max ssl up front.I would go +40 all round with 5mm spacer up front if you want to be safeOr +20 all round if you go ssl/sssl and roll rearsthat hight 8.5+20 will fit without rolling/flaring Link to comment Share on other sites More sharing options...
towsw001 Member 67 Member For: 12y 5m 26d Gender: Male Location: Adelaide Posted 04/07/13 02:40 PM Share Posted 04/07/13 02:40 PM Thanks for your help guys. The rims I want only come in the +20 and +40 I believe. The wheel shops ive called have seemed to think the +40 is the better option as the +20 will hit the guard especially if I want to lower it. I think that's what they said. So might go for the +40 on front with a spacer and see how we go. Bellato if you run a +42 with a 5mm spacer then mine should be fine. Does yours scrape or hit anything at all? Thanks again guysI assume you mean "%" when you say "mm" for the profile? Are you not going to use at least a 9.5" for the rear?Yep %, brain has been fried with all this talkGo the +20. Can run a 245 easy.+20 all round.^^^ this and this.+40 will be too close on the inside.this is a pic of 245 slightly stretched on 20x9 +32.20x8.5 +40 will be closer than this...IMAG0112.jpgI have 20x8.5 +42 and run a 245/35 but I have a 5mm spacer. Cars apart so ill try for the wheel with spacer off n see whether a +40 would work but highly doubt it. 245/35 will.As for +20 you can't run a 245/35 if you go too low. Max ssl up front.I would go +40 all round with 5mm spacer up front if you want to be safeOr +20 all round if you go ssl/sssl and roll rearsthat hight 8.5+20 will fit without rolling/flaring Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 25d Posted 04/07/13 09:11 PM Share Posted 04/07/13 09:11 PM No rubbing but it's essentially +37 now. As said with the front you'll have no problems with a +20 if you don't go lower than ssl springs up front, of you go sssl or coilovers then it will rub so you can either go down to a 30 profile or choose the +40 offsetYou sure mummba about not needing a roll? If 20x10 +40 needs a roll then 20x8.5+20 will sit about the same (actually 1.25mm further out). I think +20 will work on the rear if you go ssl or sssl with a roll.The other option is plenty of low, bit of camber and you'll be sweet lol 1 Link to comment Share on other sites More sharing options...
towsw001 Member 67 Member For: 12y 5m 26d Gender: Male Location: Adelaide Posted 05/07/13 12:19 AM Share Posted 05/07/13 12:19 AM No rubbing but it's essentially +37 now. As said with the front you'll have no problems with a +20 if you don't go lower than ssl springs up front, of you go sssl or coilovers then it will rub so you can either go down to a 30 profile or choose the +40 offsetYou sure mummba about not needing a roll? If 20x10 +40 needs a roll then 20x8.5+20 will sit about the same (actually 1.25mm further out). I think +20 will work on the rear if you go ssl or sssl with a roll.The other option is plenty of low, bit of camber and you'll be sweet lolThanks mate appreciate it. I will ask TSW a bit more and see what they think. I hope they arent just trying to make a sale and once its shipped down to me its my problem Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now