sols Member 58 Member For: 12y 2m 6d Gender: Male Location: sa Posted 30/06/13 10:31 PM Share Posted 30/06/13 10:31 PM Ok there a 42 offset 8.5". What can be done to make them look decent? Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/212/#findComment-1402823 Share on other sites More sharing options...
sols Member 58 Member For: 12y 2m 6d Gender: Male Location: sa Posted 30/06/13 11:12 PM Share Posted 30/06/13 11:12 PM Ha ha. Nah my car has the standard xr50 wheels on it. that's a photoshop of some stance sc 5s which im also considering among others Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/212/#findComment-1402827 Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 8m 23d Gender: Male Location: Perth, WA Posted 01/07/13 01:32 AM Share Posted 01/07/13 01:32 AM On 30/06/2013 at 10:31 PM, sols said: Ok there a 42 offset 8.5". What can be done to make them look decent?Should sit the same as factory +36 8" wide wheel in terms out outer rim face. Will have about 12mm less inner clearance. Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/212/#findComment-1402886 Share on other sites More sharing options...
fehlbie Donating Members 142 Member For: 16y 2m 13d Posted 01/07/13 08:31 AM Share Posted 01/07/13 08:31 AM Can someone recommend a company to pump my guards and roll the lips on my FG Sedan so I can fit bigger rubber in Sydney? Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/212/#findComment-1403011 Share on other sites More sharing options...
JET50T Donating Members 152 Member For: 14y 2m 26d Gender: Male Location: Castle Hill Posted 01/07/13 09:22 AM Share Posted 01/07/13 09:22 AM Nelson at Sydney guard rolling Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/212/#findComment-1403024 Share on other sites More sharing options...
fehlbie Donating Members 142 Member For: 16y 2m 13d Posted 02/07/13 10:18 AM Share Posted 02/07/13 10:18 AM Thanks for that, will give them a try. Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/212/#findComment-1403321 Share on other sites More sharing options...
towsw001 Member 67 Member For: 13y 26d Gender: Male Location: Adelaide Posted 04/07/13 03:45 AM Share Posted 04/07/13 03:45 AM tried to have a brief look through the forum but 53 pages of this stuff makes it hard and pretty confusingWill this be ok?TSW Mallory in 20s 8.5 +40 front and rear running a 245/35/20 all roundI know +35 is more ideal but from what ive gathered from TSW they do a +40 or a + 20 (x10 not 8.5).Ive had a dealer say that it should be fine althought 'not ideal'TSW said it would be absolutely fine without a doubtCar is stock G6eT suspension although do want to lower it if possible in the future.Thanks Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/212/#findComment-1403817 Share on other sites More sharing options...
fr33r Donating Members 92 Member For: 12y 9m 26d Gender: Male Location: Riverina NSW Posted 04/07/13 04:11 AM Share Posted 04/07/13 04:11 AM (edited) On 08/06/2013 at 12:40 PM, Oni said: Here is my fourth set of wheels pursuing offset for the FG! The fronts are 8.5 inch +20 and the rears are 10 inch +40. Tyres are Invo 255 and 305s though I will need to roll the rear guards. Finally I am happy with the exterior and wheels. Cheers Geoff Here are tsw, specs listed and at std height no guard work will be needed. Can go lower but more than ssl and rear guard work may be needed. 8.5 +40 will look like std offset wheels Sent from my HTC One XL using Tapatalk 2 Edited 04/07/13 04:14 AM by fr33r 1 Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/212/#findComment-1403828 Share on other sites More sharing options...
towsw001 Member 67 Member For: 13y 26d Gender: Male Location: Adelaide Posted 04/07/13 05:23 AM Share Posted 04/07/13 05:23 AM On 04/07/2013 at 4:11 AM, fr33r said: Here are tsw, specs listed and at std height no guard work will be needed. Can go lower but more than ssl and rear guard work may be needed. 8.5 +40 will look like std offset wheels Sent from my HTC One XL using Tapatalk 2Fark those wheels look good. If +40 with 20x10s only just need the guards rolled on the rear then 8.5s will be fine. However he has +20s on the front, anyone confirm that +40s front and back will be fine?Sorry for probably a repeated post. I will source the forum a bit more now...Sam Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/212/#findComment-1403841 Share on other sites More sharing options...
fletty Member 191 Member For: 13y 3m 19d Gender: Male Posted 04/07/13 05:27 AM Share Posted 04/07/13 05:27 AM These are both appropriate for this thread.. 1 Link to comment https://www.fordxr6turbo.com/forum/topic/92946-fg-offsets-and-tyre-questions/page/212/#findComment-1403843 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now