Jump to content

Fg Offsets And Tyre Questions


Dillz

Recommended Posts

  • Member
  • Member For: 11y 7m 3d
  • Gender: Male
  • Location: sa

Quick question. Found some cheap vertini fashions that were once on an fg but there only 8 or 8 5'' wide all round. Are these going to look like poo on an fg as most u guys run 10" rears from wat I can tell

Link to comment
Share on other sites

  • Member
  • Member For: 11y 7m 3d
  • Gender: Male
  • Location: sa

5/114.3??? Is this offset or stud pattern. Could I space them to a respectable offset? They only have 225 on them so does tgat mean they would be 8"

Link to comment
Share on other sites

  • Donating Members
  • Member For: 12y 2m 22d
  • Gender: Male
  • Location: Riverina NSW

Stud pattern, correct one.

You would have to look at the wheels, they should have the width and offset written on them somewhere.

225 would not look very flash...

Link to comment
Share on other sites

  • billet turbos and weathered engines dont mix
  • Donating Members
  • Member For: 12y 5m 19d
  • Gender: Male
  • Location: Wollongong

Here is my fourth set of wheels pursuing offset for the FG!

The fronts are 8.5 inch +20 and the rears are 10 inch +40. Tyres are Invo 255 and 305s though I will need to roll the rear guards. Finally I am happy with the exterior and wheels.

Cheers

Geoff

TSW0836_7_8small_zps7db5bc53.jpg

is it ok if I come and spend a night with that arse? il pay big $$

haha that is f***ing mint!

  • Like 2
Link to comment
Share on other sites

  • Member
  • Member
  • Member For: 15y 10m 7d
  • Gender: Male
  • Location: Radelaide.. Real

ok lads...

It's Trivia time! lets begin..

So I'm looking to do some wheels for the ute, I want to make the most out of the FG wide guards rear/ front.

these are the rims ill be ordering once I have figured out the correct size/ offset/ fitment. (no one steal my rims.. lol)

post-33271-137128992216_thumb_zpsef9eb07

post-33271-137128993806_thumb_zps85d1c55

post-33271-137128986539_thumb_zpsee29d4c

My dream is run the following (I am no rim wizard) so correct me as I go. 12inch rear with 325 wide tyres, I might need to pump/roll the guards... and (what size rim with stretch) will fit a 265 wide tyre? e.g 9/9.5inch?

what offset/ size/ ratio etc should I be looking at?

any info will be appreciated

Cheers

Dom

Link to comment
Share on other sites

  • Tampon inserted, Auto Acquired, next purchase a new handbag
  • Donating Members
  • Member For: 16y 7m 21d
  • Gender: Male
  • Location: Vic

Jase ran a 10" -40 with rolled guards, what's that work out to in 12"? Another mate has 10.5" +35 with 325 and unrolled guards.

That's rears.

9.5-10"+20 fronts :)

Edited by Henz
Link to comment
Share on other sites

  • Donating Members
  • Member For: 14y 22d

Quick question. Found some cheap vertini fashions that were once on an fg but there only 8 or 8 5'' wide all round. Are these going to look like poo on an fg as most u guys run 10" rears from wat I can tell

Won't look that bad if offsets are right. People on here run 10's because it helps to run a wider tyre to get more grip. But if your car is that in your dp then keep the wheels on it over the fashions

Jase ran a 10" -40 with rolled guards, what's that work out to in 12"? Another mate has 10.5" +35 with 325 and unrolled guards.

That's rears.

9.5-10"+20 fronts :)

If 12" would be -15 wouldn't it?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'