Jump to content

Fg Offsets And Tyre Questions


Dillz

Recommended Posts

  • Donating Members
  • Member For: 14y 1m 3d

I am looking at the same offsets so could keep you updated. I have gone with the20x10 +45. The 10.5 will hit the control arm at+45. The front will be ok. What are the wheels you are looking at?

Have you tried a 10 +45? I've heard people have rubbing issues with +42 so 3mm more is really going to be pushing it

Link to comment
Share on other sites

  • Member
  • Member For: 11y 6m 8d

Howdy

After seeing lots of wheels discussions and photos I thought this would be the best place to post

I have found these wheels to suit 350z or newer 370z (this is my first issue, as I have no idea about stud pattern)

The sizes are 20x 9 (+15mm offset) front and 20 x 10.5 (+28mm offset)

Here is the wheel

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=360430622791&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en

Any help would be appreciated thanks guys!

Link to comment
Share on other sites

  • Donating Members
  • Member For: 16y 8m 14d
  • Gender: Male
  • Location: Brisbane

Hunting down some new wheels, looking for the best fitment for FG ute when lowered without guard work. Can you get a 19x9.5 under the front?

Front options:

19x8.5 +35

19x8.5 +25

19x9.5 +38

19x9.5 +25

19x9.5 +15

Rear options, need to fill the guards?

19x10.5 +32

19x10.5 +22

19x10.5 +12

19x11.0 +18

Thanks guys

Link to comment
Share on other sites

  • Donating Members
  • Member For: 14y 1m 3d

Howdy

After seeing lots of wheels discussions and photos I thought this would be the best place to post

I have found these wheels to suit 350z or newer 370z (this is my first issue, as I have no idea about stud pattern)

The sizes are 20x 9 (+15mm offset) front and 20 x 10.5 (+28mm offset)

Here is the wheel

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=360430622791&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en

Any help would be appreciated thanks guys!

Check out site sponsor taleb tyres, they sell these wheels here in Aus and will be able to help you with fitment

On a FG. Will fit no probs, with rolled guards, stretched tyres and a bit of camber

Link to comment
Share on other sites

  • Donating Members
  • Member For: 14y 1m 3d

Wogpot thanks mate this is for a ute so does that mean I dont need to camber, guard roll etc lol?

Thanks Bellato will check that out now!

No idea for the rear but front will still need guard work and stretch or lower profile tyre. trainer had 20x8.5 +27 lowered on pedders XA's and with a 245/35 it rubbed, with 245/30 it didn't. You're looking at going 18ish mm further out from the guards. I know a guy running a 19x8.5 + 15 but with a 245/40 tyre so effectively the same as 20x8.5 with 245/35 lowered up front and it rubs on turns. Both these cars have had guard work. with no low you'll be fine, but that much poke and no low will look sh*t. Only way I can see it working is if you go a 245/35 tyre (maybe even 235/35) and still rolling the guards

Speak to Taleb and I'd say they would say the same. Rohana's should come in a couple of offsets iirc

18x9.5 +30s all round varresteon recommend? They sit flush all round apparently?? Anyone confirm? Thanks!!

Yea sounds about right for flush fitment. If you got FB check out this 9.5 +12 but with a fair bit of stretch http://www.facebook.com/photo.php?fbid=346720342084449&set=a.127728323983653.27444.100002394589195&type=3&theater

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'