FIXR7 Member 116 Member For: 14y 6m 1d Gender: Male Location: Perth Posted 15/05/13 11:47 AM Share Posted 15/05/13 11:47 AM I'd say you'd want +22 on the rear ALLLAG. I just measured the drivers side of mine and it was about 65-70mm to the outside of the body which doesn't take into account diff centralisation which is quite often, out.A +12 gives you 55mm poke and the +22 of course is 45mm. Assuming of course you have the stock 19x8's now? Link to comment Share on other sites More sharing options...
jimmixr Donating Members 686 Member For: 14y 3m 7d Posted 15/05/13 11:54 AM Share Posted 15/05/13 11:54 AM +20 .. in a 10.5Tsw do them..What would be the best offset for the TSW rims on a FG ute...... Link to comment Share on other sites More sharing options...
mummba Member 525 Member For: 14y 8m 20d Gender: Male Location: perth Posted 15/05/13 12:02 PM Share Posted 15/05/13 12:02 PM I'd say you'd want +22 on the rear ALLLAG. I just measured the drivers side of mine and it was about 65-70mm to the outside of the body which doesn't take into account diff centralisation which is quite often, out.A +12 gives you 55mm poke and the +22 of course is 45mm. Assuming of course you have the stock 19x8's now?10.5 +12 will fit may just need to roll a little, I had 9.5+20 with a 35mm bolt on spacer witch would have been out a further 14 mm with just a rolled guard no probs Link to comment Share on other sites More sharing options...
FIXR7 Member 116 Member For: 14y 6m 1d Gender: Male Location: Perth Posted 15/05/13 12:09 PM Share Posted 15/05/13 12:09 PM I'm sure you're right, I just assumed he doesn't want to roll the lip. Link to comment Share on other sites More sharing options...
wanted New Member 6 Member For: 11y 8m 3d Posted 15/05/13 12:17 PM Share Posted 15/05/13 12:17 PM +20 .. in a 10.5Tsw do them..Thanks. I assume will need to run a 285/295 tyre on a 10.5" rim Link to comment Share on other sites More sharing options...
jimmixr Donating Members 686 Member For: 14y 3m 7d Posted 15/05/13 08:42 PM Share Posted 15/05/13 08:42 PM Easy..you can manage 285 under a sedan. Id be looking at 295..305 minimum..Thanks. I assume will need to run a 285/295 tyre on a 10.5" rim Link to comment Share on other sites More sharing options...
stevanford Member 268 Member For: 12y 9m 25d Posted 19/05/13 10:39 PM Share Posted 19/05/13 10:39 PM Look at 17'' Rota Grid R to mount drag radials on. Would I need +12, +25 or +35 offset ? Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 1m 7d Posted 19/05/13 10:50 PM Share Posted 19/05/13 10:50 PM ^^ How wide? 9.5"? Either way I think +35 is your best bet. With 9.5 and +35 should be able to get a 275 drag tyre on there with no issues Link to comment Share on other sites More sharing options...
stevanford Member 268 Member For: 12y 9m 25d Posted 19/05/13 11:16 PM Share Posted 19/05/13 11:16 PM ^^ How wide? 9.5"? Either way I think +35 is your best bet. With 9.5 and +35 should be able to get a 275 drag tyre on there with no issuesI was looking at the 9'' wide wheels. Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 1m 7d Posted 20/05/13 12:27 AM Share Posted 20/05/13 12:27 AM Yea I would still probably go with +35, +25 or lower will just come too close to the guard and no need for flush drag wheels lol Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now