Pazzo Donating Members 11,132 Member For: 14y 1m 1d Gender: Male Posted 14/05/13 12:00 AM Share Posted 14/05/13 12:00 AM They are XXRs but not the 552s... $1000 for the 4 Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 1m 3d Posted 14/05/13 12:04 AM Share Posted 14/05/13 12:04 AM Nah not the look I'm after. I can get the 522's for $1000 delivered from the states n waiting for some quotes locally Thanks anyway pazz Link to comment Share on other sites More sharing options...
wanted New Member 6 Member For: 11y 7m 30d Posted 14/05/13 03:10 AM Share Posted 14/05/13 03:10 AM They are XXRs but not the 552s... $1000 for the 4What site is the best to get these wheels from the states??Anthony Link to comment Share on other sites More sharing options...
vxr50t Member 134 Member For: 11y 7m 11d Posted 14/05/13 03:22 AM Share Posted 14/05/13 03:22 AM Bellato you could probably get away with your current camber for the front as they will still sit in the guard by a few mm. The rear will depend entirely on clearance at the guard and lower trailing arm. Fair enough on the tyre sizes. That xxr wheel is heavy, was thinking of those a few years back. But they're cast so one buckle and its bye bye wheel. Cheap but heavy and not as strong as forged Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 1m 3d Posted 14/05/13 03:37 AM Share Posted 14/05/13 03:37 AM What site is the best to get these wheels from the states??Anthonyxxr wheels can get from most places for similar prices. nlmotoring are good according to mosthttp://www.nlmotoring.com/XXR-Wheels-962-s/48.htmBellato you could probably get away with your current camber for the front as they will still sit in the guard by a few mm. The rear will depend entirely on clearance at the guard and lower trailing arm.Fair enough on the tyre sizes. That xxr wheel is heavy, was thinking of those a few years back. But they're cast so one buckle and its bye bye wheel. Cheap but heavy and not as strong as forgedYea well closest I found to what I want so far is 19x8.5 +17 about same amount of low and they have a bit of rubbing, I just need to check how much guard work and camber on there's to find outAs for the rears, not worried about the guards, just the control blade. I've read of a few that have done +42. I just need to get underneath my car and measure to check that's allYea I realise they're not the 'best' quality and I'm hoping the higher profile can help take some of the impact. But in saying that if one does break they aren't overly expensive to get another set sent over. Can either pay $300 to get another sent over from the states or $1000 to get another set and keep the rest as spares or sell them cheap to someone Link to comment Share on other sites More sharing options...
Pazzo Donating Members 11,132 Member For: 14y 1m 1d Gender: Male Posted 14/05/13 03:57 AM Share Posted 14/05/13 03:57 AM What site is the best to get these wheels from the states??AnthonyThose wheels are from St George tyres in Sydney..... If not in Sydney freight is only $85 Link to comment Share on other sites More sharing options...
vxr50t Member 134 Member For: 11y 7m 11d Posted 14/05/13 04:18 AM Share Posted 14/05/13 04:18 AM You'll find a 40, 35 profile combo is quite comfy for street - I run the same on mine and was quite surprised at firstThe xxrs are alright for the price but when I ordered mine I still had no wheels after 2 months of waiting so canned the whole idea and looked elsewhere. This was 3 years ago though Link to comment Share on other sites More sharing options...
wanted New Member 6 Member For: 11y 7m 30d Posted 14/05/13 11:29 AM Share Posted 14/05/13 11:29 AM Does anyone know what offset this guy is runningFront 20x8.5+20???Rear 20x10+40 or +20??I've read 20x10+40 will fill the rear of a sedan but don't think will have the same effect on the ute so I assume +20 would be a better fit.ThanksWhat would be the best offset for the TSW rims on a FG ute...... Link to comment Share on other sites More sharing options...
ALLLAG Member 42 Member For: 13y 10m 6d Posted 15/05/13 11:13 AM Share Posted 15/05/13 11:13 AM Back again with another stupid question. Sorry.Varrstoen 2.2.2 (19 inch) to fit a FG ute am I right in getting: 9.5 + 22 fronts and 10.5 + 12 rears?Would a 245/35 front and 275/30 rear be the best choice in tyre size?Cheers. Link to comment Share on other sites More sharing options...
mummba Member 525 Member For: 14y 8m 17d Gender: Male Location: perth Posted 15/05/13 11:25 AM Share Posted 15/05/13 11:25 AM Back again with another stupid question. Sorry.Varrstoen 2.2.2 (19 inch) to fit a FG ute am I right in getting: 9.5 + 22 fronts and 10.5 + 12 rears?Would a 245/35 front and 275/30 rear be the best choice in tyre size?Cheers.yep would be sik!! rears guards may need a little massaging but wouldn be much if any Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now