FIXR7 Member 116 Member For: 14y 6m 1d Gender: Male Location: Perth Posted 13/05/13 11:28 AM Share Posted 13/05/13 11:28 AM Thanks mate. Appreciate your time. Even with that calculator I still have no idea what I am looking at haha.Looks like I would have to run some stretched tyres or find a different manufacturer that looks similar.No wuckers,Just keep studying the calculator and punch in different numbers and you'll get the hang of it. I notice the European and U.S. Varrstoen sites list different offsets and sizes the Aussie site doesn't have...even other styles. Link to comment Share on other sites More sharing options...
ALLLAG Member 42 Member For: 13y 10m 9d Posted 13/05/13 11:48 AM Share Posted 13/05/13 11:48 AM I will probably just surrender and go for 2.2.2's instead.Give me an engine/turbo and im fine. Put offsets and wheels and I will be lost for days. Link to comment Share on other sites More sharing options...
FIXR7 Member 116 Member For: 14y 6m 1d Gender: Male Location: Perth Posted 13/05/13 12:09 PM Share Posted 13/05/13 12:09 PM Yeah I know what you mean...think I might go TSW Nurburgring over them but I'll paint em silver. I'm still holding out for something else though.Cheers,Pete. Link to comment Share on other sites More sharing options...
vxr50t Member 134 Member For: 11y 7m 15d Posted 13/05/13 12:17 PM Share Posted 13/05/13 12:17 PM there was supposed to be a product from carbon art 2 years ago that changed the position of the lower control arm to allow for 11" rim with 315 tyreI dunno if carbon art are around anymore as their website doesn't seem to be responding and there weren't any updates on itcheck post #88 in the thread belowhttp://www.fordforums.com.au/showthread.php?t=11347350&page=3or post #228 in this current thread (page 6) Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 1m 7d Posted 13/05/13 12:48 PM Share Posted 13/05/13 12:48 PM 19x8.5 +15 with 245/40/1919x10 +42 with 275/35/19Close call on front guards and close to control blade in the rear? Should look about even side on though? Link to comment Share on other sites More sharing options...
vxr50t Member 134 Member For: 11y 7m 15d Posted 13/05/13 01:29 PM Share Posted 13/05/13 01:29 PM (edited) Fronts should be fine, will sit in 5mm compared to mineRears will be inward 9mm more than mine but might clear the lower control arm as its 19"Sidewall should be 35 front 30 rear for 19" to keep speedo true Edited 13/05/13 01:29 PM by vxr50t Link to comment Share on other sites More sharing options...
XRSEXT Member 235 Member For: 12y 3m 30d Gender: Male Posted 13/05/13 10:29 PM Share Posted 13/05/13 10:29 PM that's mine with 20x10 on rear no mods required & hasnt scrubbed once since being fitted Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 1m 7d Posted 13/05/13 11:01 PM Share Posted 13/05/13 11:01 PM Fronts should be fine, will sit in 5mm compared to mineRears will be inward 9mm more than mine but might clear the lower control arm as its 19"Sidewall should be 35 front 30 rear for 19" to keep speedo trueYea only difference though my car is fairly low and at the moment currently running -1deg in the rear and -0.7 up front, might take the fronts out to -1 if need beNah currently run 35 and 30 on 20's so 40 and 35 on 19's will be the same as what I have now and speedo is only out 3-4% Link to comment Share on other sites More sharing options...
Pazzo Donating Members 11,132 Member For: 14y 1m 4d Gender: Male Posted 13/05/13 11:24 PM Share Posted 13/05/13 11:24 PM Bellato... What sort of 19s you have in mind? I found a set and very cheap for 4 staggered. Will through up a pic soon for you19x8.5+35 2" lip and 19x9.5+35 3.5"lip Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 1m 7d Posted 13/05/13 11:46 PM Share Posted 13/05/13 11:46 PM Xxr 522'sGoing for a similar look to a guy unr33l on ford forumsOkay post it up n ill have a look.Probably shouldn't upgrade wheels incase something goes wrong when it's on te dyno in a couple of months Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now