Bellato Donating Members 2,713 Member For: 14y 22d Posted 04/05/13 10:04 AM Share Posted 04/05/13 10:04 AM Who thinks I can fit 275/35 18 all round on my FG sedan?Wheels are SSR Type C 18 X 9.5" with +22 0ffset.Here are some pics with my current tyres, some 2nd hand Michelin slicks. 250 front, 270 rear.P10404871.jpgP10404851.jpgP10404861.jpgTyres will be Hankook Z214 Grooved slicks. On their way as we speak from tire rack.hk_ventus_z214_ci2_l.jpgRear guards have been rolled and with 1.5 deg of neg camber, rears should just tuck under the guards.In theory, I am hoping the fronts will be fine.I have tested a 18 X 9.5 +30 with a 265 on front and it seemed to clear in the carpark, but with 1 deg of neg camber, bot the 3.5deg I run at the circuit.As stock FRONT offset is +36 with a 245 tyre (on 8" rim), a 275 will only poke out 15mm further in but due to offset (36 vs 22), should be only 1mm difference.Does this make sense?Hoping I don't need a 3 or 5mm spacer and longer studs.Won't need longer studs for wheel spacers. I currently have 5mm up front and plenty of wheel stud left, but I would want custom spacers if you're going to use them on a track, normal slip ons wouldn't be ideal Link to comment Share on other sites More sharing options...
Panda Eyes flame magnet Gold Donating Members 5,674 Member For: 16y 5m 25d Gender: Male Location: adelaide hills- 'race air' central Posted 04/05/13 10:24 AM Share Posted 04/05/13 10:24 AM hard to have a hucentric with 5mm as theres not enough meat for the hub extension to the wheel.. Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 7m 22d Gender: Male Location: Vic Posted 04/05/13 10:39 AM Share Posted 04/05/13 10:39 AM I would really like to confirm it will fit before purchasing, Gaurds are getting rolled this week, wont be getting pumped unless I absolutely have to, I quite like the stretch look of the 275 on the 11 as it's the look im going for. These dont come out until the end of may so I still have plenty of time to get it sorted and make sure it's what I want. Can anyone help with the fitment on the inner gaurd for the rears?Use spacers to test it. Even use nuts/ washers. Link to comment Share on other sites More sharing options...
MA91CK billet turbos and weathered engines dont mix Donating Members 1,346 Member For: 12y 5m 20d Gender: Male Location: Wollongong Posted 04/05/13 11:12 AM Share Posted 04/05/13 11:12 AM Don't trust me on the offset, was just a suggestion. Try and test fit dude. Link to comment Share on other sites More sharing options...
fletty Member 191 Member For: 12y 8m 16d Gender: Male Posted 05/05/13 10:34 AM Share Posted 05/05/13 10:34 AM Yea I would love to test fit them, but again without travelling 5+ hours no where here will supply wheels in that offset or size locally..This is the look I would be aiming for, much preferring it over the 2.2.2 1 Link to comment Share on other sites More sharing options...
MA91CK billet turbos and weathered engines dont mix Donating Members 1,346 Member For: 12y 5m 20d Gender: Male Location: Wollongong Posted 05/05/13 11:32 AM Share Posted 05/05/13 11:32 AM Saw this on Facebook... Nek minnut had to go to the bathroom to clean up. I was seriously go back to NA to have a car like this Link to comment Share on other sites More sharing options...
MA91CK billet turbos and weathered engines dont mix Donating Members 1,346 Member For: 12y 5m 20d Gender: Male Location: Wollongong Posted 05/05/13 11:33 AM Share Posted 05/05/13 11:33 AM (edited) Much classier than varrstoens. These are those wheels that look too small to be 19s, this angle is good it shows the second lip I was talking about. Tough as Edited 05/05/13 11:33 AM by MA91CK Link to comment Share on other sites More sharing options...
Panda Eyes flame magnet Gold Donating Members 5,674 Member For: 16y 5m 25d Gender: Male Location: adelaide hills- 'race air' central Posted 05/05/13 11:34 AM Share Posted 05/05/13 11:34 AM now that would turn heads..... Link to comment Share on other sites More sharing options...
FIXR7 Member 116 Member For: 14y 5m 16d Gender: Male Location: Perth Posted 05/05/13 12:48 PM Share Posted 05/05/13 12:48 PM Be great if you could get that much rim fletty. That's the trouble with most of these wheels, they're made with the centre so far out there's nowhere left to go. Link to comment Share on other sites More sharing options...
wanted New Member 6 Member For: 11y 7m 18d Posted 05/05/13 01:11 PM Share Posted 05/05/13 01:11 PM Jimmi I found these same profile as what you getting. Sexy mate!! On white and sedan......... PORN!Does anyone know what offset this guy is runningFront 20x8.5+20???Rear 20x10+40 or +20??I've read 20x10+40 will fill the rear of a sedan but don't think will have the same effect on the ute so I assume +20 would be a better fit.Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now