FIXR7 Member 116 Member For: 14y 5m 16d Gender: Male Location: Perth Posted 04/04/13 12:13 AM Share Posted 04/04/13 12:13 AM if its a ba/f then 70.1mmBeing an FG thread no but thanks, because I don't think it would have changed from the earlier models anyway. I mean they're still using those boring five spokes that were on BF's. It's one of the more annoying things about buying a new GS...the lack of options in terms of wheels and more importantly the lack of delete options....I can't delete the roll bar or the stripes and where you used to have at least a couple of stripe colour choices you now have to have black!? At least I can peel them off and unbolt the roll bar I suppose. Link to comment Share on other sites More sharing options...
evo Member 33 Member For: 12y 11m 23d Gender: Male Location: East Suburbs, VIC Posted 04/04/13 12:59 PM Share Posted 04/04/13 12:59 PM Gday guys, Just bought a FPV F6 Ute (FG)I want to fit 20"x10" on the front and 20"x10.5" on rear.Just wondering if +20 for front and +15 rear offset be the best flush fitment on the ute? or could I push a lower offset on the rear?Cheers,Michael Link to comment Share on other sites More sharing options...
mummba Member 525 Member For: 14y 8m 5d Gender: Male Location: perth Posted 05/04/13 05:33 AM Share Posted 05/04/13 05:33 AM (edited) perfect fitment for the fronts will need to roll guards though, I want 19x10+20 for the fronts on mine but the wheels that I ordered only do 19x10+25 so will be close to the control arm...you could push for more in the rear if you want some poke but will also need to roll guards ,could go 10.5 +0 to +5edit; reread and seen you want flush.... 19x10+20 will poke and 19x10.5 +15 should be safe Edited 05/04/13 05:36 AM by mummba Link to comment Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,419 Member For: 14y 10m 16d Gender: Male Location: Melbourne Posted 05/04/13 06:55 AM Share Posted 05/04/13 06:55 AM why so wide on the fronts?fat rears is where its at! Link to comment Share on other sites More sharing options...
sols Member 58 Member For: 11y 7m 3d Gender: Male Location: sa Posted 08/04/13 03:14 AM Share Posted 08/04/13 03:14 AM Hi guys, not exactly new to the forum used to go by animalxr6t but that account seems to have gone walk about so back to the training wheels I go. Anyway iv just sold my xr6 turbo and am now in the process of buying N/a fg xr50 for the family car and need to sort out some wheels and offsets. I like the vossen cv4 but there width and offset are not like anything in here. Min of 9" wide for front and a 20 or 25 offset and rears 10.5" with a 30 or 42 or 45 0ffset. Any ideas on what would work. I like the flush look but being a family car dont want poke. Also will offset effect the concave or only width. If all is too hard ill find a different set cos there dear as it is. Oh diameter is 20" Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 22d Posted 08/04/13 06:09 AM Share Posted 08/04/13 06:09 AM Only choice on the rear is +30, others are too high. As for the front either will work.As long as you don't go too low and put a bit of stretch on the tyre, +20 up front and +30 rear, may need a bit of guard work though Link to comment Share on other sites More sharing options...
sols Member 58 Member For: 11y 7m 3d Gender: Male Location: sa Posted 08/04/13 07:15 AM Share Posted 08/04/13 07:15 AM Ok cool. Thanks. Does offset change the concave then. Cos if I have to go low offset and sacrifice the concave ill get different wheels cos concave is the shizzle Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 22d Posted 09/04/13 12:20 AM Share Posted 09/04/13 12:20 AM Just depends on the wheel and style, generally it won't make much of a difference Link to comment Share on other sites More sharing options...
vxr50t Member 134 Member For: 11y 6m 30d Posted 12/04/13 12:06 AM Share Posted 12/04/13 12:06 AM Hey Corzza, do you know what width / offsets these rims are? they look like 18sThis is UNR33L from ford forums Link to comment Share on other sites More sharing options...
Corzza 777 Member 7,135 Member For: 15y 9m 9d Gender: Male Location: Neutral Bay. Born and Bred in the RSA Posted 12/04/13 03:01 AM Share Posted 12/04/13 03:01 AM 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now