evo Member 33 Member For: 12y 11m 23d Gender: Male Location: East Suburbs, VIC Posted 21/02/13 09:58 AM Share Posted 21/02/13 09:58 AM A 10"+20 sits well on the front of an Fg.Thanks for the info mate, I would of thought you'd need a higher offset of around +35 so it wouldn't poke to much? you got any pics of one fitted?Depends if you got coilovers on front too so you can get some negative camber happening? Link to comment Share on other sites More sharing options...
TRA1NR Pitlane Member Donating Members 2,886 Member For: 17y 6m 9d Gender: Male Location: Pakenham, Victoria Posted 21/02/13 11:08 AM Share Posted 21/02/13 11:08 AM (edited) Upper control arm would be an issue if the offset is too high, and you might have issues turning with a 10 on the front.In saying that I am thinking 19x9.5 +12 all round for my next set. Edited 21/02/13 11:09 AM by TRA1NR Link to comment Share on other sites More sharing options...
STIFLR Donating Members 572 Member For: 15y 11m 2d Gender: Male Location: Victoria Posted 21/02/13 11:20 AM Share Posted 21/02/13 11:20 AM Are the RC10's big brake compliant? Link to comment Share on other sites More sharing options...
Fgtpsi Member 9 Member For: 11y 9m 12d Gender: Male Location: Melbourne Posted 03/03/13 09:07 AM Share Posted 03/03/13 09:07 AM Hey guys, sorry if this is a stupid question but I'm a bit new to this!Just had my fg xr6t lowered and new rims, I've gone ssl front and sssl rears. Front tyres are 20x8.5 with no issues. Rears are 20x10(so I was told) but from what I read this particular wheel is 20x9.5. Tyres are 275/30/r20. I believe the offset is +45 from what I can find out.My problem is they're so close to the guard and the rear drivers side scrubs on bumps but the passenger side doesn't. Also the drivers side rear seems to sit out more than the passenger side one?Is this a camber issue? An issue with the car or are these wheels just never going to fit right?Thanks Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 7m 21d Gender: Male Location: Vic Posted 03/03/13 09:10 AM Share Posted 03/03/13 09:10 AM How close? Post a pic. $100 on gaurd rolling is what I would recommend! Link to comment Share on other sites More sharing options...
Fgtpsi Member 9 Member For: 11y 9m 12d Gender: Male Location: Melbourne Posted 03/03/13 09:31 AM Share Posted 03/03/13 09:31 AM I'll grab a pic tomorrow mate. The real issue is that they don't sit the same on either side. Drivers hits the guard(regardless if its just me in the car or two people) and the passenger side doesn't hit at all. The drivers side sits like 3-5mm further out.I'm looking into pumping the guards around 5-10mm to solve the problem but its always going to bug me that they don't sit the same :S Link to comment Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,419 Member For: 14y 10m 16d Gender: Male Location: Melbourne Posted 03/03/13 09:42 AM Share Posted 03/03/13 09:42 AM how does 17x10 +15 sound for rear of fg ute?henzy..... wormy?fitting slicks on them Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 7m 21d Gender: Male Location: Vic Posted 03/03/13 10:14 AM Share Posted 03/03/13 10:14 AM But aggressive for a fat slick freaky though in 17 will never be near gaurd anyway. Fgtpsi diffs are rarely centred with panels. They can be adjusted, "centred" but IMO it's probably the difference in panel fitment. Just roll pump and relax. Link to comment Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,419 Member For: 14y 10m 16d Gender: Male Location: Melbourne Posted 03/03/13 10:36 AM Share Posted 03/03/13 10:36 AM only gonna fit a 275/40 henz Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 7m 21d Gender: Male Location: Vic Posted 03/03/13 10:50 AM Share Posted 03/03/13 10:50 AM Just go a 9 or 9.5 + 30-35. Or even 10 + 30. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now