xeghia82 Member 54 Member For: 12y 10m 2d Gender: Male Location: Melbourne, South Eastern Suburbs Posted 06/02/13 12:55 PM Share Posted 06/02/13 12:55 PM hey guys, looking at getting some vertini drift rims in 20". would be looking at 20x8.5 and 20x10 to fit a fg xr6t sedan on ssl front and sssl rear springs. what offsets would I be looking at for a flush lokoing fitment?thanks in advance.George Link to comment Share on other sites More sharing options...
Panda Eyes flame magnet Gold Donating Members 5,674 Member For: 16y 5m 25d Gender: Male Location: adelaide hills- 'race air' central Posted 06/02/13 09:36 PM Share Posted 06/02/13 09:36 PM (edited) Vertini Magics in Black, 20x8.5 +25, 20x10 +38. fit nicely, running 30 profile tires all round and have not had a scrape yet, really liking them. Although the achilles are not as sticky as the nitto's!.Next up will be the roof and spoiler being wrapped in gloss black late next week so watch out for those pics! (5 pics in this post and they are big! be patient it's worth it!)Edited by TRA1NR, 26 September 2012 - 07:35 PM. Edited 06/02/13 09:38 PM by Panda Eyes 1 Link to comment Share on other sites More sharing options...
griffo Member 66 Member For: 15y 11m 26d Gender: Male Posted 07/02/13 07:19 AM Share Posted 07/02/13 07:19 AM I have come across these 15mm spacers on eBay. Has anyone used them before?http://www.ebay.com.au/itm/111004031597?_trksid=p5197.c0.m619#ht_1133wt_1163Should these be right in the 5x114.3 - M12 1.5 for the front wheels of my G6E? Current wheel is a 20x8 with a +35 offset Link to comment Share on other sites More sharing options...
Panda Eyes flame magnet Gold Donating Members 5,674 Member For: 16y 5m 25d Gender: Male Location: adelaide hills- 'race air' central Posted 07/02/13 09:59 AM Share Posted 07/02/13 09:59 AM you would have to cut your studs considerably to fit these, unless the rims have cut outs on the back face to accommodate. Link to comment Share on other sites More sharing options...
griffo Member 66 Member For: 15y 11m 26d Gender: Male Posted 07/02/13 11:00 AM Share Posted 07/02/13 11:00 AM Yeah, my rims have cut outs and holes in between the actuall stud holes of the rims. Is m12 1.5 correct to match the standard studs? Link to comment Share on other sites More sharing options...
Panda Eyes flame magnet Gold Donating Members 5,674 Member For: 16y 5m 25d Gender: Male Location: adelaide hills- 'race air' central Posted 07/02/13 09:33 PM Share Posted 07/02/13 09:33 PM yes- but also ask the seller what the centre bore size is. alot of these are 66mm and you will need 70.5mm. Link to comment Share on other sites More sharing options...
griffo Member 66 Member For: 15y 11m 26d Gender: Male Posted 08/02/13 12:48 AM Share Posted 08/02/13 12:48 AM 73mm center bore... seems like it should be fine...So if my wheels are a +35 by adding a 15mm spacer it should equate to +20 offset for the front of the FG Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 1m 19d Gender: Male Location: Perth, WA Posted 08/02/13 01:46 AM Share Posted 08/02/13 01:46 AM (edited) griffo you will need hub rings I think with the 73mm center bore. Also it looks like the 15mm spacers above do not have a lip to center the rim so could be asking for trouble with regards to wheels being out of center especially with the bigger bore size of the spacers.The 25mm spacers that Trainer used are the best I have seen, just with they came in 15mm and 20mm as well. Edited 08/02/13 01:50 AM by XtRmn8 Link to comment Share on other sites More sharing options...
Panda Eyes flame magnet Gold Donating Members 5,674 Member For: 16y 5m 25d Gender: Male Location: adelaide hills- 'race air' central Posted 08/02/13 01:17 PM Share Posted 08/02/13 01:17 PM def get hubcentric rings. inner 70.5mm- outer 73mm. they are pretty cheap. Link to comment Share on other sites More sharing options...
Bobby-Seadoo Member 11 Member For: 12y 1m 22d Posted 15/02/13 12:25 AM Share Posted 15/02/13 12:25 AM Hey guys,Looking for some help.I have an FG XR6 Turbo Sedan.Looking at getting Lenso D1R 20 x 10 + 42 & 20 x 8.5 + 35.Will this offset sit flush with the guards ?Will I need to roll the rear guards at all ?Also - Need to lower it a little. What King Springs would I need to have the guards sitting just above the tyre. Dont want it slammed as I tow my Jetski with it.Any help is greatly appreciated.Saw a photo of Worms orange BA/BF with the 20" Lenso's and now im sold on the wheels !CheersRob Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now