Jump to content

Fg Offsets And Tyre Questions


Dillz

Recommended Posts

  • flame magnet
  • Gold Donating Members
  • Member For: 16y 7m 11d
  • Gender: Male
  • Location: adelaide hills- 'race air' central

fronts only so far (I can find the rear ones ha ha...)

EOi4x.jpghttp://Xquhx.jpg

Edited by Panda Eyes
Link to comment
Share on other sites

  • flame magnet
  • Gold Donating Members
  • Member For: 16y 7m 11d
  • Gender: Male
  • Location: adelaide hills- 'race air' central

I mean cant find them...

there's proof you can get 9.5's on the front of a BA...

Edited by Panda Eyes
Link to comment
Share on other sites

  • Member
  • Member For: 12y 1m 2d

anyone spaced the stock 18" rims?

thinking of powder coating them white, as it will be A VERY LONG TIME before (if ever) I could get new rims (expensive hobbies) and getting them pushed out to try and get a wider stance.

shouldnt change camber, and due to the small amount that exists, it'll JUST lower the car a fraction (not even measurable id guess)

how far would before it rubs? (car is standard height)

Link to comment
Share on other sites

  • flame magnet
  • Gold Donating Members
  • Member For: 16y 7m 11d
  • Gender: Male
  • Location: adelaide hills- 'race air' central

I got a level and put it against the guard down to the ground then measured the distance from the top of the rim to the inside of the level.

exact equals flush, any more means poke....

Edited by Panda Eyes
Link to comment
Share on other sites

  • Member
  • Member For: 12y 1m 2d

I got a level and put it against the guard down to the ground then measured the distance from the top of the rim to the inside of the level.

exact equals flush, any more means poke....

that simple hey?

dont have a level, but a bit of logic (when does the straight bar fall in/out) and a good eye says ive got up to 40mm on the front and 45mm on the rear. lip of rim to outside of the body that is. would take that back 5mm or so for error.

tires dont rub when suspension gets compressed?

Link to comment
Share on other sites

  • flame magnet
  • Gold Donating Members
  • Member For: 16y 7m 11d
  • Gender: Male
  • Location: adelaide hills- 'race air' central

I havent driven mine more than up and down the road so dont know. my cars not lowered though...

sounds fair with the -5mm thing...

  • Like 1
Link to comment
Share on other sites

  • Donating Members
  • Member For: 13y 4m 1d
  • Gender: Male
  • Location: Randwick, sydney

how did they go Panda? level idea sounds like a good idea. u have to show a before and after man! I think I'll get two off that same guy if they are half decent!

Link to comment
Share on other sites

  • Donating Members
  • Member For: 14y 2m 5d
  • Gender: Male

Does anyone have some info on these?

Im guessing they are te37 copies of some sort? Quite like the fitment and would be very keen on the offset/size and type they really are.

33881_325815697533557_1942061414_n.jpg

Rota Grid... PM Henz as he has a set for sale in ... 19x8.5+25 and 19x9.5+35.
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'