G6ETurbs Member 7 Member For: 12y 16d Gender: Male Location: Perth, Western Australia Posted 08/11/12 08:32 AM Share Posted 08/11/12 08:32 AM Thanks for clearing that up worm.Don't worry she'll be low soon Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 8m 3d Gender: Male Location: Vic Posted 08/11/12 08:38 AM Share Posted 08/11/12 08:38 AM 10.5 +38 would be bloody tight on the inside! Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 1m 4d Posted 08/11/12 08:59 AM Share Posted 08/11/12 08:59 AM I can't imagine fitting 10.5 +38! I have 10" +38 and its tight lol. Add an extra 6mm to the inside and I'd say it will rub on the control blade. In saying that a 3mm spacer should do the job Link to comment Share on other sites More sharing options...
Oni New Member 19 Member For: 15y 12d Gender: Male Location: Sydney Posted 08/11/12 09:33 AM Share Posted 08/11/12 09:33 AM Thanks guys but bugger. Will have to keep looking.CheersGeoff Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 1m 4d Posted 08/11/12 09:51 PM Share Posted 08/11/12 09:51 PM What does everyone reckon would be the highest offset you can go on the front of an FG to fit a 245/35 on a 20x8.5. Reason I ask is because my car is fairly low and at the moment have a 225/35 (previous owner) and I have a +42 offset and I don't think 245/35 will fit, so wondering how much I can push it out with spacers without getting too close to the guards so I don't have to roll/pump them. 5mm should do the trick yea? Because the car's low I can't actually see inside the guard to see how much to the upper control arm Link to comment Share on other sites More sharing options...
Worm A much better forum Silver Donating Members 3,808 Member For: 16y 4m Gender: Male Location: Victoria Posted 09/11/12 07:09 AM Share Posted 09/11/12 07:09 AM +20 is a good fit...But you won't find spacers that are 18mm... Link to comment Share on other sites More sharing options...
falconXR6T Member 128 Member For: 21y 7m 8d Posted 09/11/12 07:20 AM Share Posted 09/11/12 07:20 AM (edited) Hey Guys, ok, I think I have finally decided on a set of wheels. TSW interlagos for the G6ET. Plenty of performance cred but more classic styling to suit the G6ET. I am hoping that Jimmixr will provide some wisdom with regards to guard clearance as I will be getting the same offsets 20x8.5, ET+20 with 255/30 Invos and 20x10, ET+40 with 285/30 Invos. Will I have to roll guards at both ends? What springs are in each end? Opinions on my selection welcome too. Thanksgot these on my f6 with ssl/sssl no need to roll the guards, good fit, these wheels are awesome, way lighter than my standard original twist wheels Edited 09/11/12 07:21 AM by falconXR6T 1 Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 1m 4d Posted 09/11/12 09:12 AM Share Posted 09/11/12 09:12 AM Pics? Any neg camber on the rear? Link to comment Share on other sites More sharing options...
fr33r Donating Members 92 Member For: 12y 3m 4d Gender: Male Location: Riverina NSW Posted 09/11/12 09:21 AM Share Posted 09/11/12 09:21 AM ^^ Some pics would be great! Link to comment Share on other sites More sharing options...
j.d Member 1,222 Member For: 14y 3m 27d Gender: Male Location: Eastern Suburbs, Melbourne Posted 09/11/12 09:57 AM Share Posted 09/11/12 09:57 AM What does everyone reckon would be the highest offset you can go on the front of an FG to fit a 245/35 on a 20x8.5. Reason I ask is because my car is fairly low and at the moment have a 225/35 (previous owner) and I have a +42 offset and I don't think 245/35 will fit, so wondering how much I can push it out with spacers without getting too close to the guards so I don't have to roll/pump them. 5mm should do the trick yea? Because the car's low I can't actually see inside the guard to see how much to the upper control armI have the same, 5mm spacer will work, or you can be like me and use a 35mm spacer but will need to roll, or just use a 25mm spacer, and no need to roll. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now