fr33r Donating Members 92 Member For: 12y 3m 8d Gender: Male Location: Riverina NSW Posted 06/11/12 12:38 AM Share Posted 06/11/12 12:38 AM Nice choice of wheel. What colours the G?I'm running all the same except 245/35 fronts. My rear springs are SSSL kings with rolled guards. I never drove it with out rolling them so I cant really say if they would of touched. But in saying that theres around 10mm clearance. The only place they will touch is where the rear bar meets the rear quarter.. bit of trimming there but nothing major. Up to last week I was running SSSL fronts.. they ended up sagging abit to much for comfort so I swapped my SSL back in. Again no guard rolling needed on the front. Not really recommended for the front as it will distort the guard. But what I did have to do it trim the bar where it meets the guard same as the rear. But in saying that my SSSL springs had settled to 330mm and that's being generous. You'll be running a slightly wider tyre , but I really don't think you'll have any issue.Hope this clears up any questionsCheersYes that helps a lot. Car is edge in colour. Unfortunately I do not have Photoshop as I would like to see a mock up but I think the black rims will go well and I have a brembo 6/4 set up to go under them. Looks like it will be SSL up front and SSSL in the rear and I will go to the 245/35 up front to be on the safe side. I saw your fit up earlier in this tread and it looks spot on, then looked up TSW rims and found these, light and strong too.Many thanks.I would go to a 9.5" rim with a 255 up front with a +25 offset.Edit: correctionsThanks, unfortunately these are not available with 114.3 stud in a 9 or 9.5 so will go back to 245/35. CheersI'm not sure about the front but I'd imagine a 255/30 +20 would be pretty flush and I wouldn't want to go much lower than ssl because my sssl at the front tucks the tyre.As for the rear you'll definitely fit that but again I wouldn't go too low. sssl would be pushing it (unless you want to run neg camber). And I would definitely get the rear guards pumped and rolled.Fronts will be near flush and will definitely will get the guards done on the rear. See you when you get back. Link to comment Share on other sites More sharing options...
cizzink11 Member 352 Member For: 12y 3m 27d Gender: Male Posted 06/11/12 03:24 AM Share Posted 06/11/12 03:24 AM Would anyone here be interested in my work Meisters for swaps/buy? Pm me can send detailed pics etc,I am wanting to get my hands on a 2012 set of xr6 turbo wheels but there tricky to find Link to comment Share on other sites More sharing options...
will-82 Member 427 Member For: 19y 10m 11d Location: sydney Posted 07/11/12 08:43 AM Share Posted 07/11/12 08:43 AM Would anyone here be interested in my work Meisters for swaps/buy? Pm me can send detailed pics etc,I am wanting to get my hands on a 2012 set of xr6 turbo wheels but there tricky to findwhat are the specs of your meisters Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 8m 7d Gender: Male Location: Vic Posted 07/11/12 08:55 AM Share Posted 07/11/12 08:55 AM X2. And how much cash on top of my Rota's with 295s?And that blue xr/g6 is porn. Link to comment Share on other sites More sharing options...
cizzink11 Member 352 Member For: 12y 3m 27d Gender: Male Posted 07/11/12 02:51 PM Share Posted 07/11/12 02:51 PM Different state Henz, 18x9 +1018x10+3R disc I believe they clear brembos prob looking at 3k offers cheaper with trade in, I really want to roll on stockies for a little till after Xmas got bigger plans.Got a mean quote for 50mm drop and metallic grey full body wrap :D 1 Link to comment Share on other sites More sharing options...
G6ETurbs Member 7 Member For: 12y 20d Gender: Male Location: Perth, Western Australia Posted 08/11/12 04:34 AM Share Posted 08/11/12 04:34 AM Hi guys new to this forum page but I would just like to ask a quick question about rim offset for my 2008 G6ET... I'm looking at purchasing a set if Lenso D1R's.This particular rim package has 20x8.5 fronts with a 35 offset (65mm Dish) and the rears are 29x10's with a 42 offset (100mm dish). I'm hoping they will fit into the rear end without any guard rolling etc... Tyre wise will 245/35-R20's for the front and 275/30-R20's for the rears fit fine...ANY info will be greatly appreciated Cheers!! Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 1m 8d Posted 08/11/12 05:31 AM Share Posted 08/11/12 05:31 AM Yea should be right mate! The rear will be a tight squeeze at +42 but pray to the big guy that your diff is centred Link to comment Share on other sites More sharing options...
G6ETurbs Member 7 Member For: 12y 20d Gender: Male Location: Perth, Western Australia Posted 08/11/12 05:47 AM Share Posted 08/11/12 05:47 AM Thanks mate! I've just had a 75,000km service done to the car and ford replaced a seal of some sort in the rear diff... 3 weeks later my diff was starting to whine like crazy, rung ford up they told me to bring the car in and it turns out the seal they replaced wasn't installed properly and the car had been leaking diff oil for a few weeks. Diff was obviosly rooted so they replaced it free of charge and I also got them to do the diff bushes (free) so after all that I'm hoping it will be centred. Link to comment Share on other sites More sharing options...
Worm A much better forum Silver Donating Members 3,808 Member For: 16y 4m 4d Gender: Male Location: Victoria Posted 08/11/12 06:36 AM Share Posted 08/11/12 06:36 AM Will fit easy. You'll have gaps. Lower it heaps Link to comment Share on other sites More sharing options...
Oni New Member 19 Member For: 15y 16d Gender: Male Location: Sydney Posted 08/11/12 08:25 AM Share Posted 08/11/12 08:25 AM Hi againHas anyone tried these?http://www.ebay.com.au/itm/VARRSTOEN-2-2-19x8-5-10-5-5X114-TE37-Style-wheels-FORD-FALCON-F6-PURSUIT-/261102692337?pt=AU_Car_Parts_Accessories&hash=item3ccaeee7f1&_uhb=1#ht_500wt_1204Only clones of TE37s but always my favourite wheel.CheersGeoff 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now