Corzza 777 Member 7,135 Member For: 15y 9m 29d Gender: Male Location: Neutral Bay. Born and Bred in the RSA Posted 02/11/12 02:37 AM Share Posted 02/11/12 02:37 AM Serious hybrid that is! Link to comment Share on other sites More sharing options...
cizzink11 Member 352 Member For: 12y 3m 30d Gender: Male Posted 02/11/12 02:49 AM Share Posted 02/11/12 02:49 AM Makes me have second thoughts about my xr front end, does look really nice Link to comment Share on other sites More sharing options...
Oni New Member 19 Member For: 15y 19d Gender: Male Location: Sydney Posted 05/11/12 05:45 AM Share Posted 05/11/12 05:45 AM Hi again I may have decided on a wheel from the interwebs hat has the right pdc but then the website asks for "bore" they choices are 72mm and 76mm. Am I right to assume 76mm is the right choice for an FG?Cheers and thanksGeoff Link to comment Share on other sites More sharing options...
cizzink11 Member 352 Member For: 12y 3m 30d Gender: Male Posted 05/11/12 05:56 AM Share Posted 05/11/12 05:56 AM Yes Geoff it's 76.2 if I recall correct? Link to comment Share on other sites More sharing options...
wombatG6ET Bronze Donating Members 707 Member For: 12y 5m 18d Gender: Male Location: cherrybrook Posted 05/11/12 06:44 AM Share Posted 05/11/12 06:44 AM I could be wrong but I thought 70.6 is the centre bore worm would be the guy to ask Link to comment Share on other sites More sharing options...
fr33r Donating Members 92 Member For: 12y 3m 11d Gender: Male Location: Riverina NSW Posted 05/11/12 07:06 AM Share Posted 05/11/12 07:06 AM (edited) Hey Guys, ok, I think I have finally decided on a set of wheels. TSW interlagos for the G6ET. Plenty of performance cred but more classic styling to suit the G6ET. I am hoping that Jimmixr will provide some wisdom with regards to guard clearance as I will be getting the same offsets 20x8.5, ET+20 with 255/30 Invos and 20x10, ET+40 with 285/30 Invos. Will I have to roll guards at both ends? What springs are in each end? Opinions on my selection welcome too. Thanks Edited 05/11/12 07:07 AM by fr33r Link to comment Share on other sites More sharing options...
j.d Member 1,222 Member For: 14y 4m 3d Gender: Male Location: Eastern Suburbs, Melbourne Posted 05/11/12 08:48 AM Share Posted 05/11/12 08:48 AM (edited) Hi again I may have decided on a wheel from the interwebs hat has the right pdc but then the website asks for "bore" they choices are 72mm and 76mm. Am I right to assume 76mm is the right choice for an FG?Cheers and thanksGeoffour centre bore is 70.5 I would be getting 72mm not 76 Edited 05/11/12 08:49 AM by j.d Link to comment Share on other sites More sharing options...
jimmixr Donating Members 686 Member For: 14y 3m 11d Posted 05/11/12 12:55 PM Share Posted 05/11/12 12:55 PM Hey Guys, ok, I think I have finally decided on a set of wheels. TSW interlagos for the G6ET. Plenty of performance cred but more classic styling to suit the G6ET. I am hoping that Jimmixr will provide some wisdom with regards to guard clearance as I will be getting the same offsets 20x8.5, ET+20 with 255/30 Invos and 20x10, ET+40 with 285/30 Invos. Will I have to roll guards at both ends? What springs are in each end? Opinions on my selection welcome too. ThanksNice choice of wheel. What colours the G?I'm running all the same except 245/35 fronts. My rear springs are SSSL kings with rolled guards. I never drove it with out rolling them so I cant really say if they would of touched. But in saying that theres around 10mm clearance. The only place they will touch is where the rear bar meets the rear quarter.. bit of trimming there but nothing major. Up to last week I was running SSSL fronts.. they ended up sagging abit to much for comfort so I swapped my SSL back in. Again no guard rolling needed on the front. Not really recommended for the front as it will distort the guard. But what I did have to do it trim the bar where it meets the guard same as the rear. But in saying that my SSSL springs had settled to 330mm and that's being generous. You'll be running a slightly wider tyre , but I really don't think you'll have any issue.Hope this clears up any questionsCheers 1 Link to comment Share on other sites More sharing options...
cizzink11 Member 352 Member For: 12y 3m 30d Gender: Male Posted 05/11/12 04:21 PM Share Posted 05/11/12 04:21 PM (edited) I would go to a 9.5" rim with a 255 up front with a +25 offset.Edit: corrections Edited 05/11/12 04:22 PM by cizzink11 Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 1m 11d Posted 05/11/12 09:48 PM Share Posted 05/11/12 09:48 PM I'm not sure about the front but I'd imagine a 255/30 +20 would be pretty flush and I wouldn't want to go much lower than ssl because my sssl at the front tucks the tyre.As for the rear you'll definitely fit that but again I wouldn't go too low. sssl would be pushing it (unless you want to run neg camber). And I would definitely get the rear guards pumped and rolled. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now