RynoF6 Idiot Member Donating Members 446 Member For: 14y 10m 5d Gender: Male Location: Muswellbrook, NSW Posted 01/07/12 12:44 AM Share Posted 01/07/12 12:44 AM Not sure about being refaced but they are redrilled as the ch black that I have only come in 5x120 stud pattern.The control arm gives less room the closer it get to the locating point. My tyres are taller by 5% but if I ran 285/30 it bet they wouldnt rub. So true about tyres being smaller or larger than stated. On my old jeep I ran 34" simexes that stood taller than most 35"s Link to comment Share on other sites More sharing options...
jimmixr Donating Members 686 Member For: 14y 3m 7d Posted 01/07/12 06:58 AM Share Posted 01/07/12 06:58 AM My 19x10 FR19 Simoins are +35 and theres a good half inch to the cotrol blade. Admittedly they only 275/30 Kumhos.. but theres heaps of room.Pete you could be right.. probably wont get rectified till I shag my bushes. Also Im running SSSL rear..so the wheel sits deeper in the guard. From memory your on SSL ??Personally I dont think its worth the head*uck for an extra half an inch..In other words..stop putting ideas in my head !!! lol 1 Link to comment Share on other sites More sharing options...
Corzza 777 Member 7,135 Member For: 15y 9m 25d Gender: Male Location: Neutral Bay. Born and Bred in the RSA Posted 01/07/12 07:07 AM Share Posted 01/07/12 07:07 AM Sorry Jimmi! Tunehouse said they will sort my cradle out when I get my rear bushes replaced. Its just the way I am. This was 8 months ago just havent been bothered really lolOne reason I want to do it though is when I do a burn out she its perfectly straight but when I kick back a gear and boot it and if she starts spinning she kicks out to the left the longer side. Hoping by aligning it she doesnt kick out as much Link to comment Share on other sites More sharing options...
RynoF6 Idiot Member Donating Members 446 Member For: 14y 10m 5d Gender: Male Location: Muswellbrook, NSW Posted 01/07/12 07:49 AM Share Posted 01/07/12 07:49 AM (edited) My 19x10 FR19 Simoins are +35 and theres a good half inch to the cotrol blade. Admittedly they only 275/30 Kumhos.. but theres heaps of room.Pete you could be right.. probably wont get rectified till I shag my bushes. Also Im running SSSL rear..so the wheel sits deeper in the guard. From memory your on SSL ??Personally I dont think its worth the head*uck for an extra half an inch..In other words..stop putting ideas in my head !!! lolGood half inch so 12.xmm10.5" +42 needs 11mm more inner clearance over 10" +35.Mine measures at 9.x and 9.x, looked and the bbs have a fat rear lip Edited 01/07/12 07:51 AM by RynoF6 Link to comment Share on other sites More sharing options...
Benny Member 1,869 Member For: 21y 3m 21d Gender: Male Location: Newcastle Posted 01/07/12 09:46 AM Share Posted 01/07/12 09:46 AM (edited) Hey Guys,I just got some new wheels and coilovers put in. I'm happy with the look so far and the handling is much better.Benny. Edited 01/07/12 09:49 AM by Benny 1 Link to comment Share on other sites More sharing options...
jimmixr Donating Members 686 Member For: 14y 3m 7d Posted 01/07/12 10:12 AM Share Posted 01/07/12 10:12 AM Looks hot Benny..sits really nice.Ryno.. yeah its a good 12mm. The simmons have a decent lip aswell.Pete.. people pay good money to kick sideways !!! Link to comment Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 18y 3m 5d Gender: Male Location: Melbourne, VIC Posted 01/07/12 11:17 AM Share Posted 01/07/12 11:17 AM Very nice Benny....Any performance mods to the GT? Link to comment Share on other sites More sharing options...
Corzza 777 Member 7,135 Member For: 15y 9m 25d Gender: Male Location: Neutral Bay. Born and Bred in the RSA Posted 01/07/12 08:57 PM Share Posted 01/07/12 08:57 PM lol @ Jimmi this iv noticed of late.Benny very nice mate! For the price of these rims its a bargain, looks stealth Link to comment Share on other sites More sharing options...
Benny Member 1,869 Member For: 21y 3m 21d Gender: Male Location: Newcastle Posted 01/07/12 09:50 PM Share Posted 01/07/12 09:50 PM Thanks guys. The old Zumbo wheels are too good a value to pass up. Quality seems quite good so far as well. I compared weights of the stock wheels & tyres and the new set. Factory wheel and tyre weighs approx 24kgs, new 20x8 with tyre weighs 24.5kgs and rear 20x10 wiith tyre weighs 27kgs.MiKa the mods done so far are in my signature. Next stage of mods are on the bench in the garage which is pulleys, injectors and Xcal3.Benny. 1 Link to comment Share on other sites More sharing options...
Worm A much better forum Silver Donating Members 3,808 Member For: 16y 4m 3d Gender: Male Location: Victoria Posted 01/07/12 10:11 PM Share Posted 01/07/12 10:11 PM They are the best value wheel you can buy!There's also a set on eBay... GMAX verve... Good value for $$$ Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now