Jump to content

Custom Zorst. What Mufflers for silence?


bupalooga

Recommended Posts

  • Silver Donating Members
  • Member For: 12y 1m 16d
  • Gender: Male
  • Location: Griffith NSW

So I'm Pimping out the rear section of my twin exhaust from the axle back by sending it to either side of the ute.

Q: As I'm removing the rear muffler, what/how many mufflers should I use to make it quiet again, preferably quieter. (space constrained)

 

oval.jpg    hotdog.jpg

http://www.performanceexhaust.com.au/~2320  http://www.performanceexhaust.com.au/p/15-LONG-X-2.5-DIAMETER-MILD-STEEL-UNIVERSAL-HOTDOG/HD15250P-P

 

- 2x of the oval mufflers have the same internal volume as the existing twin muffler so would that produce the same sound output?
- Or I could fit twice as many hot dogs. How many hot dogs would it take for equal silencing as one oval muffler?

- Do these 2 types work the same or differently?

I don't know the sciences of mufflers other than I want straight through unrestricted pipes, no baffles or 1" Varex chokers thank you.

 

 

 

Current setup is venom 4" dump & Cat into Pacemaker twin 2.5". While it sounds nice I want it to go louder with some sort of bi-modal/valve setup as I leave home in the mornings while the family is still asleep.

custom zorst plans.jpg

 

Plan is unbolt the rear section above the axle & go from there, running one pipe straight up under the tray and through the rear tailgate. The other one will go up and across just behind the diff then out the opposite side of the tray, both straight pipe.

Trick is once they get up under the tray ill put a y-pipe & butterfly valve to a 2nd (& 4th) pipe running on the other side of the trays main beams which will be full of mufflers for silence.

 

custom zorst quad 4in.jpg

Ill be moving the reversing lights, get half size break/blinkers & re-route some wiring. Also try & go Quad 4" tips but may have to settle for Quad 3.5"

 

Between toolbox-Beam I have 5" tight so 4" wide mufflers at a maximum.

Link to comment
Share on other sites

  • To Loud
  • Gold Donating Members
  • Member For: 12y 11m 22d
  • Gender: Male
  • Location: WA, Perth

Ummmm, ummmm NFI. Let me walk outside for you...

 

There you go mate

3.5" tips

Edited by masda74
Edit post to include sizes
  • Like 2
Link to comment
Share on other sites

  • XR50T
  • Gold Donating Members
  • Member For: 11y 6m 21d
  • Gender: Male
  • Location: Western Sydney

Nope don't even think about dumping at the diff if you want to keep your hearing after driving 20 minutes, was a headache after that long with one muffler.

Link to comment
Share on other sites

  • FREAKY
  • Donating Members
  • Member For: 14y 10m 28d
  • Gender: Male
  • Location: Melbourne

you can still have 2 mufflers around the diff

 

doesnt have to just have 1 ya know

 

a forum member did something like this but only to one side. *beep* of a job to get right to avoid knocks/noises etc.

Link to comment
Share on other sites

  • Silver Donating Members
  • Member For: 12y 1m 16d
  • Gender: Male
  • Location: Griffith NSW
15 hours ago, OZYWALKER said:

Nope don't even think about dumping at the diff if you want to keep your hearing after driving 20 minutes, was a headache after that long with one muffler.

 

18 hours ago, Ford Freak said:

just dump it at the diff

 

Ive had the rear section unbolted for a couple days and there's no way I'd be able to put up with the noise all the time, I need it to go quiet.

Plus I'm mostly doing this because I want the Big quad tips through the tray look

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'