rollex Member 683 Member For: 10y 5m 1d Gender: Male Location: Australia Posted 14/02/17 11:09 PM Author Share Posted 14/02/17 11:09 PM No but its pretty obvious. Take the coil pack cover off and they line up exactly with the top of the coil pack pushing it into the block when you screw the cover down. Link to comment Share on other sites More sharing options...
ScottyB New Member 5 Member For: 10y 2m 6d Posted 14/02/17 11:35 PM Share Posted 14/02/17 11:35 PM Thx Link to comment Share on other sites More sharing options...
rollex Member 683 Member For: 10y 5m 1d Gender: Male Location: Australia Posted 16/02/17 01:16 AM Author Share Posted 16/02/17 01:16 AM (edited) Ok well the idle problem is 100% fixed, not a single miss the past few days but now I have a new problem. A serious misfire/power loss on full boost. Checked the timing and it never drops below ~2 degrees so I don't think its injectors as otherwise the knock sensor would be kicking in and pull timing galore down to -10 or something (I think). I'm scared to test it out in case it is fuel pump or something and the knock sensor just isn't picking it up. Got a nice smell of fuel from the boot these days so going to pull everything out and see if the return hose has popped off or something. If I'm losing an injector/fuel pump the knock sensors should kick in surely? Any other suggestions? Edited 16/02/17 01:19 AM by rollex Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,927 Member For: 16y 6m 30d Gender: Male Location: Melbourne Posted 16/02/17 01:25 AM Share Posted 16/02/17 01:25 AM I'd definitely be checking the fuel system if you can smell it in your boot. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 17d Gender: Male Location: Perth Posted 16/02/17 01:27 AM Share Posted 16/02/17 01:27 AM Miss fire will be spark related. How old are the coils? Link to comment Share on other sites More sharing options...
rollex Member 683 Member For: 10y 5m 1d Gender: Male Location: Australia Posted 16/02/17 01:59 AM Author Share Posted 16/02/17 01:59 AM Read up, they are brand new oem 3 weeks ago. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 9d Gender: Male Location: Adelaide Posted 16/02/17 02:19 AM Share Posted 16/02/17 02:19 AM Don't you have one of those Keep Paying Money intank modules ? and why are you still struggling with why the knock sensor activity on the scanner is incorrect, like seriously! sure hope pull your socks up on your own tuning platforms scanner Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,927 Member For: 16y 6m 30d Gender: Male Location: Melbourne Posted 16/02/17 02:20 AM Share Posted 16/02/17 02:20 AM ^^ this guy ^^ Link to comment Share on other sites More sharing options...
rollex Member 683 Member For: 10y 5m 1d Gender: Male Location: Australia Posted 16/02/17 03:49 AM Author Share Posted 16/02/17 03:49 AM (edited) 1 hour ago, JETURBO said: Don't you have one of those Keep Paying Money intank modules ? and why are you still struggling with why the knock sensor activity on the scanner is incorrect, like seriously! sure hope pull your socks up on your own tuning platforms scanner I'm using a walbro that heinrich put in. I'm not looking at the knock sensor activity, rather if timing is being pulled or not. I know what my minimum timing should be, so if the knock sensor is kicking in I should see it drop below this. I've seen it before so I'm confident I can log it. I have no scanner implemented into my software yet. Though what I will be doing is only logging DMRs that are output from specific tables. So we can show an equation like. Limit(BaseTimingMap, MaxTimingMap) * lambdaScaler * IntakeTempScaler * .... - KnockAdder = FinalTiming All with live values so you can tell what is doing what, would love to get a list of things people like you would like, eg a wish list etc. I'm sure we can build something that is much better than what exists on the market. Post in here if you'd like https://pcmhacking.net/forums/viewtopic.php?f=4&t=4940 Anyway that is wishful thinking for now as I only have SCT to log. What are your thoughts, fuel or spark? Edited 16/02/17 03:56 AM by rollex Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,832 Member For: 9y 9m 11d Gender: Male Location: South Australia Posted 16/02/17 04:04 AM Share Posted 16/02/17 04:04 AM At the start of the thread you said there wasn't an issue with missing under load and now there is. That seems a bit backwards but whatever. I would make sure my plug gaps were around 0.7 first of all. Yours would still be 0.9 I suppose? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now