Lewis

[Lewis]

Hi there.

I am suspect of the standard heat exchanger that cools the transmission on my FG Xr50 turbo ute.

I do not want to install a kit with wheel arch mounted radiator but would rather fit a quality heat exchanger that fits in the same spot as the standard item.

does any one know of such a thing and if so can someone point me in the right direction.

I am bout to drive from Sydney to Adelaide across the desert and want to not stress about the milkshake effect.

thanks

lewis

[.Stripes.]

Hi Lewis

[Lewis]

howdy

[skidxr6t]

man I just told my mechanic to throw a new standard replacement on with new coolant.

 

would test for stray current in the cooling system which is what I think could be responsible for premature failure.

 

if you replace every 40,000kms/2years it'll be fine.

[ROB83R]

Only way to be 100% certain and remove any risk of milkshaking that box is to fark it off.

[BAXRTUTE]

$500 for aftermaket cant remember what one mine was but worked great! 

[ROB83R]

I bought a kit that goes behind the intercooler for $190 and added a bit of hose so I could move it behind the fog light. Works a charm.

[Lewis]

dont suppose you can remember for me?

I want to get this sorted asap

[BAXRTUTE]

30 minutes ago, ROB83R said:

I bought a kit that goes behind the intercooler for $190 and added a bit of hose so I could move it behind the fog light. Works a charm. 

Mine was mounted there also, I had it fitted with the new cooler ans stuff at pbe.

Lewis,

I honestly have no idea on what one it is atm. Can find out by tomorrow arvo for ya though?

Its sitting in a work shop with a bunch of other stuff I pulled off the car.

If its compatible to the zf from btr which I cant see why not @JETURBO ill happily send it to u as ill be throwing it in the bin otherwise. 

Edited 26/11/16 11:30 PM by BAXRTUTE

[ROB83R]

It will need the right fittings for the box I think. 

I think the btr has metal lines from the box to the radiator. 

http://www.gumtree.com.au/s-ad/1115442376?utm_campaign=socialbuttons&utm_content=app_ios&utm_medium=social&utm_source=sms

this kit comes with 3m of hose you just need another 3 meters and a 5/8 male on male hose joiner or a new hose to bypass the coolant valve thingy under the inlet manifold. 

Edited 26/11/16 11:55 PM by ROB83R