GTX3584RS Turbo

[demon1300]

Yeah I saw the release photos from Sema, although I'm not sure if they even have a release date for them yet. But of the two, the 91x81 would be my pick.

Yeah same. I believe they've gone to a 73mm inducer imho, this is where the original should have sat as 68mm was always a bit small for the exducer size.

[jjs_f6730_atw]

I have just fitted a GTX3584RS with new mainfolds etc to my FG F6. I won't get into the list of mods it does have a Nizpro motor, just the start of this topic you were looking for some feedback.

 

I hope you can see the hub dyno run with link I have attached a link to the video, it is on 25psi on E85. Just for your information the car pulled an extra 14 rwkw's earlier in the day, we backed it of as it is maxing out my current fuel pump (not standard). With a bigger fuel pump it should pull 600rwkw with more boost or perhaps a little more we will find at some point. My tuner said at 25psi at the higher boot levels the turbo is getting to its efficiency range.

 

https://photos.google.com/photo/AF1QipNg4fdyOCQHeY3udWSPtXIRNmuxZP32Y9nPB1LG

Edited 18/08/18 11:12 AM by jjs_f6730_atw

[demon1300]

Link looks borked mate, may chance you could just upload and attach through the forum direct?

Keen to see some results of a 3584rs as you don't see many being used.

[jjs_f6730_atw]

Hey demon1300 not sure how to upload direct to site but the link in my previous poet takes you to a video on the hub dyno