Jump to content

GTX3584RS Turbo


058OYS

Recommended Posts

  • XR50T
  • Gold Donating Members
  • Member For: 11y 7m 10d
  • Gender: Male
  • Location: Western Sydney

I doubt it would make 1000hp with the 1.1 housing, would have to go the 1.45 and that would be pretty laggy in comparison.

Looks like a killer turbo though, should fill the gap between the GTX3582 and the GTX4294 nicely.

Link to comment
Share on other sites

  • 1 month later...
  • Donating Members
  • Member For: 18y 4m 10d
  • Gender: Male
  • Location: Central Coast

You can get them with the 1.21AR housing. I think 1000hp would be a stretch but not impossible. 

 

Here is the compressor and turbine maps and roughly speaking I think 1000hp would require 100lbs/min airflow so it would out off the compressor's efficiency levels but people stretch the little gtx3576 pretty far off its rated efficiency maps also. Would need around 26psi and 6500RPM for 90lbs/min. or 30psi could see you at 100lbs/min :drivingalong:

 

GEN2GTX3584RS_CompMap.jpg

 

GEN2GTX3584RS_TurbineMap.jpg

Link to comment
Share on other sites

  • 1 month later...
  • Member
  • Member For: 8y 5m 25d

this is exactly the thread I was looking for.... would also love to see results if people have any? real shame its all V band, doesnt make for an easy bolt on application

 

the old 2680rs disco potato was an epic little turbo for the 2lt jap motors

  • Like 1
Link to comment
Share on other sites

  • New Member
  • Member For: 8y 3m 1d

Rang GCG last week re replacement setups, they can build up a T3 housing on the RS or any other in that range, but you have to buy the complete unit + the swap over housing. So they said it's specific to the gtx2 turbine so no nicking an old one off a stock unit either

Link to comment
Share on other sites

  • 2 weeks later...
  • MattyP
  • Cruise Control
  • Member For: 12y 7m 7d
  • Gender: Male
  • Location: Central Coast
On 12/02/2017 at 3:05 PM, [THOMMO] said:

this is exactly the thread I was looking for.... would also love to see results if people have any? real shame its all V band, doesnt make for an easy bolt on application

 

the old 2680rs disco potato was an epic little turbo for the 2lt jap motors

I love my Disco potato on my celica. Well gtx version of it..

 

Great turbo

Link to comment
Share on other sites

  • Member
  • Member For: 8y 5m 25d
On 13/02/2017 at 3:06 PM, oldturtle22 said:

Rang GCG last week re replacement setups, they can build up a T3 housing on the RS or any other in that range, but you have to buy the complete unit + the swap over housing. So they said it's specific to the gtx2 turbine so no nicking an old one off a stock unit either

 

 

Ahhh so buy the turbo and a second housing to swap. Still make it cheaper than custom manifold 

Link to comment
Share on other sites

  • 2 months later...
  • Member
  • Member For: 13y 3m 9d

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'