samhouston Donating Members 153 Member For: 16y 11d Gender: Male Location: Brisbane Posted 22/12/16 02:59 PM Author Share Posted 22/12/16 02:59 PM On 22/12/2016 at 2:55 PM, Puffwagon said: 550km is nothing. Anything will last that long unless it had been assembled by a sandpit. If you can feel the vibration, in this case, it's already too late. Just keep your ears/feet/etc listening mate and you should be ok. Pull it apart again at 5 thousand and see what's up. Hoping for the best homie. Expand My ears and feet are more sensitive than they have ever been driving this now! Link to comment https://www.fordxr6turbo.com/forum/topic/92641-not-qik-fg-xr6t-manual-ute/page/10/#findComment-1626067 Share on other sites More sharing options...
camo86T Silver Donating Members 1,810 Member For: 11y 3m 7d Gender: Male Location: SW Sydney Posted 16/02/17 11:13 PM Share Posted 16/02/17 11:13 PM @samhouston flywheel updates? Link to comment https://www.fordxr6turbo.com/forum/topic/92641-not-qik-fg-xr6t-manual-ute/page/10/#findComment-1632040 Share on other sites More sharing options...
samhouston Donating Members 153 Member For: 16y 11d Gender: Male Location: Brisbane Posted 17/02/17 12:12 AM Author Share Posted 17/02/17 12:12 AM All good so far mate! I put an atomic balancer on it which has taken a lot of the vibrations out of the engine which I think will help. 1 Link to comment https://www.fordxr6turbo.com/forum/topic/92641-not-qik-fg-xr6t-manual-ute/page/10/#findComment-1632045 Share on other sites More sharing options...
ROB83R Member 1,632 Member For: 9y Gender: Not Telling Location: Radioactive wasteland Posted 18/02/17 03:40 PM Share Posted 18/02/17 03:40 PM Someone mentioned on fb that they were following you the other night when you done some clutch testing turns out he's selling his hilux now because of you 1 Link to comment https://www.fordxr6turbo.com/forum/topic/92641-not-qik-fg-xr6t-manual-ute/page/10/#findComment-1632213 Share on other sites More sharing options...
samhouston Donating Members 153 Member For: 16y 11d Gender: Male Location: Brisbane Posted 18/02/17 11:51 PM Author Share Posted 18/02/17 11:51 PM What Facebook groups do people hang around in? I never know what's going on in the car scene and miss everything haha. I have been out of it for way too long!! Link to comment https://www.fordxr6turbo.com/forum/topic/92641-not-qik-fg-xr6t-manual-ute/page/10/#findComment-1632222 Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,504 Member For: 17y 1m 9d Gender: Male Location: Melbourne Posted 19/02/17 12:02 AM Share Posted 19/02/17 12:02 AM psht... forums FTW! 1 Link to comment https://www.fordxr6turbo.com/forum/topic/92641-not-qik-fg-xr6t-manual-ute/page/10/#findComment-1632224 Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 13y 5m 19d Gender: Male Location: WA, Perth Posted 19/02/17 01:28 AM Share Posted 19/02/17 01:28 AM I was going to ask the same question. What facebook group is this? I take it the forum has a closed fb page then. Link to comment https://www.fordxr6turbo.com/forum/topic/92641-not-qik-fg-xr6t-manual-ute/page/10/#findComment-1632231 Share on other sites More sharing options...
Yesh New Member 14 Member For: 8y 3m 8d Posted 19/02/17 03:53 AM Share Posted 19/02/17 03:53 AM Insane setup :O Link to comment https://www.fordxr6turbo.com/forum/topic/92641-not-qik-fg-xr6t-manual-ute/page/10/#findComment-1632235 Share on other sites More sharing options...
samhouston Donating Members 153 Member For: 16y 11d Gender: Male Location: Brisbane Posted 11/05/17 12:50 PM Author Share Posted 11/05/17 12:50 PM I had an issue with the chain tensioner and spun the timing a bit, so it bent a few valves, the good thing about that is we are going to oversize the valves and do a little more porting on the intake side and make this head flow even better. Also going to throw some even heavier springs in it while it is apart so we can throw some more boost at it when I decide to splurge on a bigger hair dryer. Link to comment https://www.fordxr6turbo.com/forum/topic/92641-not-qik-fg-xr6t-manual-ute/page/10/#findComment-1638683 Share on other sites More sharing options...
samhouston Donating Members 153 Member For: 16y 11d Gender: Male Location: Brisbane Posted 01/06/17 03:48 AM Author Share Posted 01/06/17 03:48 AM So this happened... just mounting it up and then will have to fabricate a new dump, intake, etc and away we go! 4 Link to comment https://www.fordxr6turbo.com/forum/topic/92641-not-qik-fg-xr6t-manual-ute/page/10/#findComment-1640267 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now