JoshF6 Member 44 Member For: 8y 5m 2d Posted 16/10/16 06:35 AM Author Share Posted 16/10/16 06:35 AM Fitted the Plaz cooler kit, battery Relo and 4" intake. Bit of a stuff around with the cooler piping, but got there in the end! Car is booked in at JEM for remaining mods and tune November 8th. Sticking with the stock turbo until sometime next year, so I can save a bit of Moolah up to get more internal supporting mods upgraded to get potential out of that bigger setup. So for now will just get the fuel system & turbo mods done and aim for 400 on 98. 3 Link to comment Share on other sites More sharing options...
JoshF6 Member 44 Member For: 8y 5m 2d Posted 23/11/16 05:06 AM Author Share Posted 23/11/16 05:06 AM Update on the F6, dropped it off at CMS Prestons on Monday for oil pump gears, in-tank pump, surge tank, fuel rail, fuel pressure regulator, kpm 1000cc injectors, flash tuner, 12psi actuator, 11 blade wheel turbo conversion, flapper mod and dyno tune. Probably gonna be a stupid hot day when it's on the dyno, but see what happens on BP98 6 Link to comment Share on other sites More sharing options...
BAXRTUTE Gold Donating Members 2,639 Member For: 8y 8m 5d Posted 23/11/16 05:44 AM Share Posted 23/11/16 05:44 AM Woooooooooooooooooooo u must be pumped to pick it up for that first hot lap around joe's lil industrial track lols U should shight in 400 2 Link to comment Share on other sites More sharing options...
JoshF6 Member 44 Member For: 8y 5m 2d Posted 29/11/16 12:06 PM Author Share Posted 29/11/16 12:06 PM (edited) Ok so got the car back on Friday arvo. Was a bit deflated when when I got the power figure, but driving it since has been a blast! Comes on hard and keeps powering through the rev range. Made 342rwkw and 939nm. Joe got it upto 380rwkw at 18psi, but the valve springs were letting go pretty bad at that range, so he pulled it back. Plus it was a stinker of a day in the dyno room I was told. At current power level car is smooth and runs perfect and I'll get the valve springs sorted in a few months and retune. Dyno graph attached hopefully Edited 29/11/16 12:11 PM by JoshF6 1 Link to comment Share on other sites More sharing options...
eff xr6t Member 569 Member For: 11y 2m 24d Posted 29/11/16 12:34 PM Share Posted 29/11/16 12:34 PM You had the whole motor apart and you didn't put a set of valve springs in it?be aware, I think I could probably get you close - ish to that price for new through Atomic !$1000 for brand new atomic rods and Pistons?? Sign me up for 3 sets... 2 Link to comment Share on other sites More sharing options...
BAXRTUTE Gold Donating Members 2,639 Member For: 8y 8m 5d Posted 29/11/16 09:31 PM Share Posted 29/11/16 09:31 PM When u do those springs.... Head studs would be wise why there at it. 10 hours ago, JoshF6 said: Dyno graph attached hopefully That boost line is beautiful 1 Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m 23d Gender: Male Location: Adelaide Posted 29/11/16 09:50 PM Share Posted 29/11/16 09:50 PM (edited) Said "close-ish" and yes I can get close to that with my pricing He hasn't had the whole engine apart yet for the rotating assembly ....but factory valve springs were definitely going to show their weakness at that mid 300 zone still a good amount of power to kick off with josh Edited 29/11/16 09:54 PM by JETURBO 1 Link to comment Share on other sites More sharing options...
JoshF6 Member 44 Member For: 8y 5m 2d Posted 29/11/16 11:27 PM Author Share Posted 29/11/16 11:27 PM Thanks guys, pretty damn happy with it for the power figure. They barely open the engine up to swap out pump gears and I wouldn't have had an issue supplying the valve springs if they thought they were a good idea, but it seems to be Russian roulette what power they withstand. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m 23d Gender: Male Location: Adelaide Posted 29/11/16 11:55 PM Share Posted 29/11/16 11:55 PM Yeh my last tuned F6 with factory springs only went 356rwkw @ 17.5psi before float swopped springs only and rolled up 366rwkw on the same tune chit happens and they are all different but you have some simple mods to do and ull be nudging the 400 no worries 1 Link to comment Share on other sites More sharing options...
demon1300 Member 435 Member For: 12y 10m 15d Gender: Male Posted 30/11/16 05:55 AM Share Posted 30/11/16 05:55 AM Yeah mine went 360ish before needing springs. Looks like it's got plenty of fuel in it too 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now