JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 7m 9d Gender: Male Location: Adelaide Posted 18/09/16 10:13 PM Share Posted 18/09/16 10:13 PM The realistic outlook for big power always costs big dollars, it is what it is honestly if you're worried about spending 4.5k then you're dreaming that you can pull this off for anything remotely close than that if you had a quick read at the F6 I just finished at 566rwkw on a stock engine the part you probably missed was the large amount of money thrown at it to get it where it was your list is missing vital parts like FPR1200 twin feed rail full fitting kit to rail intank module to suit better intercooler option than the 1000hp custom dump to custom cat section 4* full exhaust (minimum) HD clutch kit (bare minimum) those are just the parts to get it to the point where you can look at the dyno and the realistic outlook for reliability of a high power life span is low a full "bells n whistles" pump arrangement is expensive as you honestly wouldn't go about it any other way and yes all stacked up budget 3k and you will have change but if you can't fit it yourself lift that full budget to around 4k the best piece of advice I can give is have deep pockets and get it done right with reliability or become realistic to how much power your wallet can fuel and aim lower and pull off a lower power target done correctly. Big power isn't all it's stacked up to be and my last 98 fueled car would spank the sh*t out of the 566rwkw car from 0-100kmh and is heaps more fun ! I'm happy to help out any members on good prices for nearly any aftermarket items including NPC 4 Link to comment Share on other sites More sharing options...
ROB83R Member 1,632 Member For: 8y 7m 21d Gender: Not Telling Location: Radioactive wasteland Posted 18/09/16 10:33 PM Share Posted 18/09/16 10:33 PM Knew you'd fill in the gaps jet and bring us all back to reality haha! 1 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,125 Member For: 16y 8m 30d Gender: Male Location: Melbourne Posted 18/09/16 11:39 PM Share Posted 18/09/16 11:39 PM 1 hour ago, JETURBO said: Big power isn't all it's stacked up to be Link to comment Share on other sites More sharing options...
camo86T Silver Donating Members 1,810 Member For: 10y 10m 28d Gender: Male Location: SW Sydney Posted 19/09/16 12:18 AM Share Posted 19/09/16 12:18 AM 3 hours ago, BAXRTUTE said: Yeah mate, Pump, gears, chains, guides plus plus plus. No point doing just the gears, as the next weak point will break. Agree 100%, just have 'oil pump' and 'timing kit' as separate bits in my head 1 Link to comment Share on other sites More sharing options...
JoshF6 Member 44 Member For: 8y 5m 19d Posted 21/09/16 05:44 PM Author Share Posted 21/09/16 05:44 PM Ok so I went with a single Plaz Pierburg 350lph surge tank. What intank pump should I be running with this? Cheers? Link to comment Share on other sites More sharing options...
BAXRTUTE Gold Donating Members 2,639 Member For: 8y 8m 22d Posted 21/09/16 09:02 PM Share Posted 21/09/16 09:02 PM 460 intank minimum 1 Link to comment Share on other sites More sharing options...
JoshF6 Member 44 Member For: 8y 5m 19d Posted 22/09/16 02:43 AM Author Share Posted 22/09/16 02:43 AM Thanks mate, so 460LPH minimum... What's the usual go when people are buying those, as in Walbro, Bosch etc? Found a couple on eBay but only 400LPH so far Link to comment Share on other sites More sharing options...
BAXRTUTE Gold Donating Members 2,639 Member For: 8y 8m 22d Posted 22/09/16 02:47 AM Share Posted 22/09/16 02:47 AM Im running a walbro 460 with plaz surge and piersberg pump capable of 550rw wasps. @JETURBO u mite wanna help this guy out with your repco card? 1 Link to comment Share on other sites More sharing options...
JoshF6 Member 44 Member For: 8y 5m 19d Posted 22/09/16 04:46 AM Author Share Posted 22/09/16 04:46 AM Haha yes please Jet....that's gold because I was literally just reading a few posts in the Fuel thread and seen Jet warning people off eBay fakes. ^ does that 460 Walbro come in a kit or is it just a pump that replaces factory one in the cradle (straight swap sorta thing) Bank transfer awaits if you're keen to hook me up with a 460 Jet Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 2m 13d Gender: Male Location: Perth Posted 22/09/16 05:05 AM Share Posted 22/09/16 05:05 AM (edited) All you need is one of these with single or twin 460s installed Edited 22/09/16 05:06 AM by arronm 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now