Elusivef6 Member 51 Member For: 8y 6m 4d Location: SE Queensland Posted 25/08/16 01:29 AM Share Posted 25/08/16 01:29 AM Hi, Long time lurker here that thought it is about time to add something. This site has helped out greatly. So I own a 07 BF f6 typhoon in ford breeze that I bought in 09 2nd owner. Bought at 30,000kms and only has 60,000km now The car was still under warranty when it was purchased from a very unique individual (think baked beans and dirty mags) but I couldn't wait for more power. I use d a certain tuner in QLD that added a single walbro fuel pump, nizpro valve springs, injectors, Xcal 3 and Stage 1 Nizpro cooler, k&n panel filter and *shiny bling* polished crossovers it produced 273rwkw. Cost wise this hurt me a bit and didn't get me were I wanted to be. I made a post on here and it escalated quickly and it got deleted. I was lurking around here back then and had got the crazy idea that this setup could of pushed the car over 300rwkw from some of the things I had read, this was obviously not the case. Being somewhat disappointed (it hit me right in the feels) I set aside any further upgrades for years until just recently. After some more research and finding a tuner close by I ventured down to Forced Performance and Tuning Toowoomba. Now these guys are great, they take the time and listen to what your after and don't try to unnecessarily empty your wallet. I was reluctant after my last experience so nerves played a part. I got a 4'dump and cat added while retaining the factory system back. I was given plenty of options and never had any pressure in making my choice Wow ! after the parts and retune it now makes 353rwkw and the car feels so silky smooth. Economy is also up about 120+km's a tank as I was previously getting about 380 -400kms a tank. I have pictures. I will upload once I fix my donate issue (my end). I have now booked in for late September to throw more stuff at it. Clutch (NPC Twin Plate) IMS Diff hat and bushes Billet Oil Pump/gears Headstuds Valve Springs - mine are sh*t already Turbo Oil Feed Line Process West Plenum (my choice) plazmaman is cheaper but the PW is a nice bit of kit Airbox/Process West Battery Relocation Process West Twin surge tank 1000cc inj Retune on 98 & E85 XYZ Coilovers P.S Nittos are win! their a great bang for buck tyre with noticeable increase to traction. Also Transmax Z reduced gearbox noise to about 20% - So ill post back after this is done with updates & pics. Ford for life 5 Link to comment Share on other sites More sharing options...
EvilDaifu Cruise Whore Moderating Team 5,130 Member For: 19y 5m 25d Gender: Male Location: Melbourne Posted 25/08/16 01:57 AM Share Posted 25/08/16 01:57 AM Nice to hear you - obviously you're pleased with the results so far. And welcome in terms of finally creating a forum membership Link to comment Share on other sites More sharing options...
barnz Member 3,047 Member For: 11y 2m 10d Gender: Male Location: Brisbane Posted 25/08/16 02:01 AM Share Posted 25/08/16 02:01 AM So it had stock dump/cat zorst previously but all the other mods? No wonder it only went 270ish. Was that RDP by any chance.....? Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 3m 3d Gender: Male Location: Perth Posted 25/08/16 02:17 AM Share Posted 25/08/16 02:17 AM Gotta luv those dodgy Nizpro valve springs. They had a few bad batches Grab some crow VTK6T-24 springs Link to comment Share on other sites More sharing options...
Elusivef6 Member 51 Member For: 8y 6m 4d Location: SE Queensland Posted 25/08/16 02:49 AM Author Share Posted 25/08/16 02:49 AM Yer stock dump and cat /zorst. Bogus claims in threads. No not RDP Link to comment Share on other sites More sharing options...
camo86T Silver Donating Members 1,810 Member For: 10y 11m 18d Gender: Male Location: SW Sydney Posted 25/08/16 03:17 AM Share Posted 25/08/16 03:17 AM 1 hour ago, Elusivef6 said: Billet Oil Pump/gears Smart insurance right there for a manual One day I'll get there Link to comment Share on other sites More sharing options...
Elusivef6 Member 51 Member For: 8y 6m 4d Location: SE Queensland Posted 25/08/16 03:27 AM Author Share Posted 25/08/16 03:27 AM Crappy job but that's the idea. Do the foundations before cranking the power. e.g oil pump/gears diff hat, and clutch. Engine internals will be of concern at some point. Low km engine, car is well looked after. Had the battery go flat on me a few times due to it not being run for weeks at a time. That's going to change though. Link to comment Share on other sites More sharing options...
Box stock T. Member 1,384 Member For: 9y 9m 23d Posted 25/08/16 03:33 AM Share Posted 25/08/16 03:33 AM Second that on the Crow Valve springs definitely the way to go. 95lbs or 105 lbs. To many peeps chase big numbers without the base mods that allow the engine to produce numbers and numbers safely... But ya got there, the cat was definitely a big choke point. Enjoy the fruits of your labour mate.. Link to comment Share on other sites More sharing options...
Elusivef6 Member 51 Member For: 8y 6m 4d Location: SE Queensland Posted 25/08/16 03:43 AM Author Share Posted 25/08/16 03:43 AM Pics added http://imgur.com/a/tXPHJ Link to comment Share on other sites More sharing options...
.Stripes. All stock bar the k&n panel filter Silver Donating Members 8,061 Member For: 12y 10m 17d Gender: Male Location: Perth Posted 25/08/16 06:50 AM Share Posted 25/08/16 06:50 AM 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now