HI PSI Member 1,586 Member For: 18y 9m 2d Gender: Male Location: Central Queensland Posted 20/08/16 03:23 AM Share Posted 20/08/16 03:23 AM (edited) Can anyone tell me if the AP Racing 6 pots with 362mm rotors sit in further than Brembo's? As I need to know if they will fit behind my 19' Vertini Drifts on my BA Turbo. Cheers Edited 20/08/16 03:24 AM by HI PSI Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 3m 3d Gender: Male Location: Probably above atmospheric pressure Posted 20/08/16 04:02 AM Share Posted 20/08/16 04:02 AM Hmmm if only we had a member called Arronm that had a set of AP brakes. REAL race brakes you know! 4 Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 4m Gender: Male Location: Perth Posted 20/08/16 04:21 AM Share Posted 20/08/16 04:21 AM Might be able to get a ruler out if the smart ass comments stop 1 Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 5m 4d Gender: Male Location: Perth Posted 20/08/16 04:27 AM Share Posted 20/08/16 04:27 AM 24 minutes ago, -Stever- said: Hmmm if only we had a member called Arronm that had a set of AP brakes. REAL race brakes you know! Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 3m 3d Gender: Male Location: Probably above atmospheric pressure Posted 20/08/16 04:33 AM Share Posted 20/08/16 04:33 AM Could not resist! First thing I thought of. Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 9m 2d Gender: Male Location: Central Queensland Posted 20/08/16 04:45 AM Author Share Posted 20/08/16 04:45 AM 24 minutes ago, arronm said: Might be able to get a ruler out if the smart ass comments stop I would really appreciate that. Thanks... Link to comment Share on other sites More sharing options...
Tocchi Sandtrap Motorsport Donating Members 2,055 Member For: 16y 3m 2d Gender: Male Location: Perth Posted 20/08/16 05:16 AM Share Posted 20/08/16 05:16 AM Hmmm if only we had a member called Arronm that had a set of AP brakes. REAL race brakes you know!It will be interesting to see if the track of them is different to brembos.And if there is, that difference is obviously the track pedigree. Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 3m 3d Gender: Male Location: Probably above atmospheric pressure Posted 20/08/16 05:26 AM Share Posted 20/08/16 05:26 AM I AM actually curious to know the difference in dimension. I recall a thread where Harrop kits were not as wide so could fit behind more rims, IIRC. Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 4m Gender: Male Location: Perth Posted 20/08/16 01:28 PM Share Posted 20/08/16 01:28 PM (edited) The width of the AP 6 pistons can be 150-152mm. Not sure on the Brembo. Width of AP carrier 7.5mm. Outer bolt surface of carrier to outer edge of caliper 44.5mm Width of brembo carrier 8.0mm. Outer bolt surface of carrier to outer edge of caliper 44.0mm So the outer edge of both calipers from the bolt face of the hub is almost identical. But remember the AP has a 365 or 362mm disc and the Brembo has 355mm. SO the caliper will sit out further from the axle centre. Depending on the design of the wheel spoke. They may touch or not. If they clear brembo they most likely will clear the AP. The rear AP four piston calipers sit out further than the 4 piston brembo by a few mm's. Both 330mm Pro Racer and Tech expert................. Edited 20/08/16 01:51 PM by arronm 3 Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 9m 2d Gender: Male Location: Central Queensland Posted 20/08/16 01:37 PM Author Share Posted 20/08/16 01:37 PM Thanks mate, I greatly appreciate you taking the time to measure them for me. I'm going to try the wheel on a GT with 6 pots tomorrow. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now