tazzanz Donating Members 573 Member For: 9y 3m 28d Gender: Male Location: NZ Posted 10/08/16 09:10 AM Author Share Posted 10/08/16 09:10 AM Trying to find out what injectors will be suitable at the moment, Can't find much online. Would Bosch 1000cc squirters be good for 400kw? Link to comment Share on other sites More sharing options...
BAXRTUTE Gold Donating Members 2,639 Member For: 8y 7m 11d Posted 10/08/16 09:35 AM Share Posted 10/08/16 09:35 AM Yep, But telling ya now 400kw on stock internals of a BA will be almost no chance with or without E85. 350-370 is a maybe but for maybe the end of the street and u sniper a pedestrian with a rod Link to comment Share on other sites More sharing options...
ROB83R Member 1,632 Member For: 8y 6m 10d Gender: Not Telling Location: Radioactive wasteland Posted 10/08/16 09:45 AM Share Posted 10/08/16 09:45 AM Make for a good show but. Link to comment Share on other sites More sharing options...
tazzanz Donating Members 573 Member For: 9y 3m 28d Gender: Male Location: NZ Posted 10/08/16 02:51 PM Author Share Posted 10/08/16 02:51 PM Yea waiting on a couple of quotes at the moment for some new Spool rods to be installed, In saying that though browsing through the 400kw section there mulitple BA's with standard internals running over 400. Not sure I want to risk it though Link to comment Share on other sites More sharing options...
ROB83R Member 1,632 Member For: 8y 6m 10d Gender: Not Telling Location: Radioactive wasteland Posted 10/08/16 09:32 PM Share Posted 10/08/16 09:32 PM It's all in the tune shagger! On a serious note, how much are a set of rods? Plus putting them in? I'd be leaning towards a new or low kay fg short motor just for simplicity. Link to comment Share on other sites More sharing options...
BAXRTUTE Gold Donating Members 2,639 Member For: 8y 7m 11d Posted 10/08/16 11:13 PM Share Posted 10/08/16 11:13 PM Yeah ive been doing plenty of searching, spool kit is $2500 then roughly the same to get it all together. Atomic shorts are roughly the same in 550, 698 is getting very $$ Fg f6 short $3500 new! second hand long is around 4-5k Whats the budget? And what do u already have? Link to comment Share on other sites More sharing options...
skidxr6t skids Donating Members 2,754 Member For: 11y 11m 1d Gender: Not Telling Posted 11/08/16 12:07 AM Share Posted 11/08/16 12:07 AM this is awesome, almost bought one in phantom but it had heaps of problems and the guy wouldn't move on price. Had a fully built motor was all that was going for it. It'd be more cost effective to pull out your engine now while it runs perfect and rebuild it rather than wait for it to go bang. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 6d Gender: Male Location: Perth Posted 11/08/16 12:08 AM Share Posted 11/08/16 12:08 AM Just now, johnxr6t said: this is awesome, almost bought one in phantom but it had heaps of problems and the guy wouldn't move on price. Had a fully built motor was all that was going for it. It'd be more cost effective to pull out your engine now while it runs perfect and rebuild it rather than wait for it to go bang. 1 Don't need to move on price when your selling the best colour ever offered by ford. Link to comment Share on other sites More sharing options...
skidxr6t skids Donating Members 2,754 Member For: 11y 11m 1d Gender: Not Telling Posted 11/08/16 12:10 AM Share Posted 11/08/16 12:10 AM ^ it was covered in swirl marks that were 10x worse than krazy kyles ute. clearly whoever washed it thought it was the best colour as well and wanted to make love to it....with steel wool or something. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 6d Gender: Male Location: Perth Posted 11/08/16 12:13 AM Share Posted 11/08/16 12:13 AM 1 minute ago, johnxr6t said: ^ it was covered in swirl marks that were 10x worse than krazy kyles ute. clearly whoever washed it thought it was the best colour as well and wanted to make love to it....with steel wool or something. Doesnt matter. Still best....Sif anyone with a primered car can comment on paint finish anyway. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now