micka turbz New Member 16 Member For: 8y 5m 6d Posted 28/07/16 04:51 PM Share Posted 28/07/16 04:51 PM (edited) Hi guys need some advice have a ba xr6 turbo 4 speed with 200 though on the clock..Motor seems strong gearbox got replaced recently,is it worth spending money on ?? 4 inch dump exhuast,valves,wastgate,bigger cooler, air induction setup etc.Got a flash tuner but run it standard. Edited 28/07/16 04:52 PM by micka turbz Link to comment Share on other sites More sharing options...
EvilDaifu Cruise Whore Moderating Team 5,130 Member For: 19y 4m 17d Gender: Male Location: Melbourne Posted 29/07/16 09:41 PM Share Posted 29/07/16 09:41 PM I bought my BA with the intention to edit it. Makes a huge difference compared with stock! Welcome to the mad house Link to comment Share on other sites More sharing options...
skidxr6t skids Donating Members 2,754 Member For: 11y 11m 24d Gender: Not Telling Posted 29/07/16 10:04 PM Share Posted 29/07/16 10:04 PM (edited) Fit an external cooler to the gearbox if not already done! Tell us where you located so someone can recommend a reputable workshop as you want someone who knows what they're doing. oh and welcome Edited 29/07/16 10:04 PM by johnxr6t 1 Link to comment Share on other sites More sharing options...
EvilDaifu Cruise Whore Moderating Team 5,130 Member For: 19y 4m 17d Gender: Male Location: Melbourne Posted 29/07/16 11:38 PM Share Posted 29/07/16 11:38 PM Yep transmission cooler would be nice - many a cruise I've ummm had to *cough* pull over *cough* to let my BA 4 speed auto transmission cool down Link to comment Share on other sites More sharing options...
BAXRTUTE Gold Donating Members 2,639 Member For: 8y 8m 4d Posted 30/07/16 12:39 AM Share Posted 30/07/16 12:39 AM I flushed every oil possible before doing my tune, Flush and servicevthe tranny... 100% cooler needed. Flush the diff maybe 2-3 times as it mite not of been done in yrs! Then add Valve springs Injectors ID 1000s Fuel pump 460 is in mine Cooler HDI, plaz, tig, westy, I have a plaz 1000hp. But im going up in class so need it Get a throttle relo intake and battery relo kit. BRAKES!!! I got 322mm fgs in mine atm but will be selling em to get bigger. Waste gate/flapper 4inch dump & cat is a must, id get a zorst to but upto your budget I guess. Im at 250thou km and the stock block is strong at 300rkw. Starting to feel a little slip from 2-3 change when cold. Whats the end goal? Id honestly suggest nothing over 300rkw unless your happy to replace the tranny at some point!! Block wont go much past 320 either from what most say on here. The odd ba has seen 350+ but rare as funk. Plenty of help on here for u though mate, some very smart folks hiding under a bridge here and there that will pop up when u ask. Any welcome aboard the mad house. Link to comment Share on other sites More sharing options...
micka turbz New Member 16 Member For: 8y 5m 6d Posted 30/07/16 03:42 AM Author Share Posted 30/07/16 03:42 AM Sounds good cheers guys. Im in perth found a place yesterday..bpt motorsport an by the looks of there work shop an all the sick fords everywhere!! I think this is the place to go in perth. So yeah will book the car in an get some work done?. Has anyone had much too do with bpt in perth?? Link to comment Share on other sites More sharing options...
turboknapp Donating Members 783 Member For: 17y 8m 29d Gender: Male Location: perth w.a Posted 30/07/16 06:31 AM Share Posted 30/07/16 06:31 AM Haha, Have fun with that mate. I would advise you to do a little more research, there are other options. The other advise posted from the guys is real good info for you, have fun once you start modding best decision you'll make apart from choosing the car. Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 28d Gender: Male Location: Probably above atmospheric pressure Posted 30/07/16 07:22 AM Share Posted 30/07/16 07:22 AM Hey a new WA member, nice. As for BPT, V8 tuning they might be OK but I would look elsewhere for XR6T tuning. I went to them once...to buy my triple gauge pod holder hahaha. The two "big names" in shops are Xtreme Ford Tuning and Monsta Torque. There are other shops that tune Barra engines as well so look around if you don't like either of those two. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 29d Gender: Male Location: Perth Posted 30/07/16 07:37 AM Share Posted 30/07/16 07:37 AM 3 hours ago, micka turbz said: Sounds good cheers guys. Im in perth found a place yesterday..bpt motorsport an by the looks of there work shop an all the sick fords everywhere!! I think this is the place to go in perth. So yeah will book the car in an get some work done?. Has anyone had much too do with bpt in perth?? Avoid. 2 Link to comment Share on other sites More sharing options...
.Stripes. All stock bar the k&n panel filter Silver Donating Members 8,061 Member For: 12y 9m 9d Gender: Male Location: Perth Posted 30/07/16 07:48 AM Share Posted 30/07/16 07:48 AM ^WHS Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now