Phantom1973 New Member 2 Member For: 8y 5m 8d Posted 20/02/19 06:05 AM Share Posted 20/02/19 06:05 AM On 04/07/2016 at 5:46 PM, Ezy2Confuze said: ...That price looks uber cheap... Tourqueline garage has atomic and TLG pumps and timing chain sets from atomic $2000 should get you a full atomic pump and H/D atomic chain, guides and tensioner includes billet crank sprocket Link to comment Share on other sites More sharing options...
camo86T Silver Donating Members 1,810 Member For: 10y 10m 10d Gender: Male Location: SW Sydney Posted 20/02/19 06:30 AM Share Posted 20/02/19 06:30 AM (edited) What's TLG quality like? No cheaper than Atomic for complete pump - that $1000 price is if you supply your own original pump "...in good condition" Atomic does the same thing for $990 and is proven Edited 20/02/19 06:31 AM by camo86T wrong word Link to comment Share on other sites More sharing options...
ken666 Donating Members 140 Member For: 5y 11m 21d Posted 03/05/19 10:46 AM Share Posted 03/05/19 10:46 AM Just do it! Price is not to even become a factor in the decision.... I was told that my motor was fitted with a set..... It wasn't, and now I'm looking into the costs of a full rebuild, because of someones lies (while selling me the car)?? I would have fitted them myself if I knew they weren't "actually" fitted. If an engine can't breath, it chokes.... If an engine can't lube it dies, very quickly. Not a risk worth taking, trust me. Link to comment Share on other sites More sharing options...
Wyatt Donating Members 70 Member For: 5y 5m Gender: Male Location: Cairns Posted 23/08/19 11:17 AM Share Posted 23/08/19 11:17 AM I have decided I should upgrade the factory oil pump gear full assembly to "insure" my FG Xr6t engine. It has the usual required mods and has been tuned to 375rwkw on 98@14psi. It is an auto with 87k klms and I did speak to 3 speed shops in Cairns today about it and have a bit of conflicting info about whether the engine needs to come out or not. 1st shop in Cairns which also has a shop in Townsville, said they've done hundreds and do all pump mods inhouse, gears, porting, relief valve etc, said motor pretty much had to come out, couldn't really give a price cause you never know what you'll find in there maybe due to mods etc. Made me feel a bit uneasy, but then again this is new to me. 2nd shop do more GM work and weren't too sure, but did to their credit called Nizpro who agreed the motor should come out. I did give him the info about auto /power, which I assume he passed on and Nizpro said it prolly doesn't need doing. I also mentioned that I was not the burnout type but the tyres on a ute mostly cannot hold the power and the thing free wheels to 6250rpm or whatever in 1st and 2nd and maybe 3rd often before the traction control kicks in. (yeah still got the training wheels on) Maybe I could just learn to drive it! 3rd shop which was recommended by the diesel mechanic at my work who said they have done a quite a few without removing the motor for about 8 hours labour, I supply the pump, various gaskets and whatever else I want to bring along. So any thoughts from the Fordxr6turbo brains trust are very welcome. Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,051 Member For: 16y 8m 12d Gender: Male Location: Melbourne Posted 23/08/19 11:25 AM Share Posted 23/08/19 11:25 AM it can be done without removing the engine from the car, but it's a tricky endeavour which can lead to being required to remove the motor if you can't get it done that way. go with the diesel mechanic, based on what you've said there. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now