MattyP MattyP Cruise Control 6,317 Member For: 12y 8m 7d Gender: Male Location: Central Coast Posted 16/06/16 02:33 AM Share Posted 16/06/16 02:33 AM seriously? first I've heard of this... Yeah I've heard it from a few reputable people Could be wrong I have been wrong in the past Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 19d Gender: Male Location: Perth Posted 16/06/16 02:34 AM Share Posted 16/06/16 02:34 AM 2 minutes ago, k31th said: seriously? first I've heard of this... Seriously? Anecddotal evidence for about the last 8yrs suggest the turbine housing has a higher nickel content and is less prone to cracking. 2 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,130 Member For: 16y 9m 1d Gender: Male Location: Melbourne Posted 16/06/16 02:35 AM Share Posted 16/06/16 02:35 AM FG or BA is less prone? Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 19d Gender: Male Location: Perth Posted 16/06/16 02:37 AM Share Posted 16/06/16 02:37 AM FG housings are less prone to cracking. 2 Link to comment Share on other sites More sharing options...
Ezy2Confuze Member 898 Member For: 15y 2m 27d Gender: Male Location: West Perth. Posted 16/06/16 02:38 AM Share Posted 16/06/16 02:38 AM I'm actually finding this thread pretty educational. I've been thinking about what to do with regards to upgrades for a while now and will be talking to Rob next month, whilst it's in being checked for the service. I did some looking around at prices to go from the stock FG turbo to either a GTX3576R or the GTX3582R and some places are selling them for only about $700 difference So I found this unit on "special" (http://www.pacperformance.com.au/news-9032/garrett-gtx3582r-ford-falcon-xr6t-turbo-upgrade.aspx) and if it's the one in this link (http://www.pacperformance.com.au/products-10806/garrett-gtx3582r-turbocharger-ford-falcon-ba-bf-xr6t.aspx), I'm really thinking of going the 3582 for extra overhead, as I won't really have much money to spend on the car once I'm in debt paying off the house. They say in the sales spiel: "The Garrett GTX3582R available at Pac Performance comes equipped with a brand new exhaust housing, meaning there is no need to re-use the factory housing which often is fatigued due to age." "Another bonus of purchasing the Garrett GTX3582R turbo as a complete package is the highly recommended wastegate flapper modification has already been carried out with the housing itself professionally CNC ported and the OEM-spec 32mm port and flap upgraded to a higher-flowing 37mm setup; helping to rectify the common over boosting issues often seen. The kit also includes a custom CNC folded actuator bracket meaning no more dodgy-looking cut & shut jobs." "As mentioned before, the foot print of the exhaust housing is the same as the factory housing allowing the Garrett GTX3582R to bolt straight onto the standard exhaust manifold. Not only does this keep the install relatively hassle free it also helps to keep the upgrade low-key in your engine bay. " They quote $2,895.00 (GST Inclusive) + Shipping for the unit with the Turbosmart actuator. As I have my wish list including a Jonny Tig cooler, valve springs, updated fuel pump/s (depending on what Rob recommends), airbox and the usual supporting mods, if you wanted to go 450KW and be done with it (I doubt very much I would ever go E85, so it's going to run 98 ron), is this the best way to go, considering my needs are pretty basic and I won't really have much extra per pay to waste rectifying things in the event I've under specced something else? Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 8m 7d Gender: Male Location: Central Coast Posted 16/06/16 02:47 AM Share Posted 16/06/16 02:47 AM Woah I know a place that is 1300 cheaper than that That's crazy for a 3582 Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 8m 10d Gender: Male Location: Western Sydney Posted 16/06/16 02:49 AM Share Posted 16/06/16 02:49 AM That's with a rear housing@MattyP 1 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,130 Member For: 16y 9m 1d Gender: Male Location: Melbourne Posted 16/06/16 02:55 AM Share Posted 16/06/16 02:55 AM 12 minutes ago, Ralph Wiggum said: Anecddotal evidence for about the last 8yrs suggest the turbine housing has a higher nickel content and is less prone to cracking. Thanks. I did a bit of a search and found some other people saying the same thing, I guess I just missed it I did know that Garrett themselves revised their housings to contain more nickel to prevent cracking, but I didn't realise/know that it was pushed into FG model turbo's specifically. (in total about 20 different posts mention it in this forum, from about 8 different people, so a reasonable sample... ) Link to comment Share on other sites More sharing options...
Ezy2Confuze Member 898 Member For: 15y 2m 27d Gender: Male Location: West Perth. Posted 16/06/16 03:05 AM Share Posted 16/06/16 03:05 AM 5 minutes ago, mightbuyaford said: Reminds me of this: Link to comment Share on other sites More sharing options...
MattyP MattyP Cruise Control 6,317 Member For: 12y 8m 7d Gender: Male Location: Central Coast Posted 16/06/16 04:29 AM Share Posted 16/06/16 04:29 AM That's with a rear housing@MattyP Yup And so is the one I would buy Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now