k31th less WHY; more WOT Site Developer 29,052 Member For: 16y 8m 12d Gender: Male Location: Melbourne Posted 23/05/16 07:54 AM Share Posted 23/05/16 07:54 AM 57 minutes ago, k31th said: (unless some tricky welding is done to an internal wastegate housing and then it's technically an external anyway ). I said this ^^ If you weld the internally gated exhaust housing in any way to bypass the internal flapper, it's then no longer an internally gated housing. If you just weld a pipe around the internal wastegate port and flapper section, then your internal gate can vent to wherever you want, but it's almost entirely pointless If you buy a specific housing that has separate outlets for both the dump and wastegate, then this is almost as pointless as the previous method. It's entirely possible that the ebay jobby is the part that is leaking. Link to comment Share on other sites More sharing options...
Hussydabomb Member 81 Member For: 9y 11m 29d Posted 23/05/16 07:59 AM Author Share Posted 23/05/16 07:59 AM Ill probably just put the old 4" dump back on for good measure but it wasn't that bad of a leak I believe.. This is on it atm I'm dyslexic and cannot turn off simple functions in tapatalk Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,052 Member For: 16y 8m 12d Gender: Male Location: Melbourne Posted 23/05/16 08:05 AM Share Posted 23/05/16 08:05 AM Yeah, that doesn't look like it seals around the dump/gate sections in the standard exhaust too well... Link to comment Share on other sites More sharing options...
Hussydabomb Member 81 Member For: 9y 11m 29d Posted 23/05/16 08:10 AM Author Share Posted 23/05/16 08:10 AM It sounds good though Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,052 Member For: 16y 8m 12d Gender: Male Location: Melbourne Posted 23/05/16 08:13 AM Share Posted 23/05/16 08:13 AM Of course it would sound good haha if some of that "wastegate" noise you're getting is actually airflow that's meant to be pushing more air into your intake, it's a detriment you can get the sound from an external wastegate relatively cheaply... obviously not as cheap as an eBay dump, though. Link to comment Share on other sites More sharing options...
Hussydabomb Member 81 Member For: 9y 11m 29d Posted 23/05/16 08:17 AM Author Share Posted 23/05/16 08:17 AM The dump pipe just got dumped then ? and hello sweet sweet boost, precious boost. Ill go external in a few weeks when I have some pocket money there are some legit nice ones a place in melbourne do. I'm dyslexic and cannot turn off simple functions in tapatalk Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,052 Member For: 16y 8m 12d Gender: Male Location: Melbourne Posted 23/05/16 08:20 AM Share Posted 23/05/16 08:20 AM It's just one of the possible problems, though... It's just an easy one to eliminate, especially if you have the correct size dump already. Cut a hole in the exhaust housing MCM style Then you can mount and run an external gate with screamer, all while holding boost better than ever before haha 1 Link to comment Share on other sites More sharing options...
Hussydabomb Member 81 Member For: 9y 11m 29d Posted 23/05/16 08:20 AM Author Share Posted 23/05/16 08:20 AM Also wtf is this dyslexic comment on my posts.... I'm dyslexic and cannot turn off simple functions in tapatalk 1 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,052 Member For: 16y 8m 12d Gender: Male Location: Melbourne Posted 23/05/16 08:22 AM Share Posted 23/05/16 08:22 AM It's your tapatalk signature... turn your tapatalk signature off and that text won't show up 1 Link to comment Share on other sites More sharing options...
eff xr6t Member 569 Member For: 11y 2m 22d Posted 23/05/16 08:35 AM Share Posted 23/05/16 08:35 AM 17psi bleeding down to a pathetic 10psi... And here lies the reason why the stock ba motor is throwing rods on the floor. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now