dayjunkie Member 20 Member For: 15y 7m 6d Gender: Male Location: QLD Posted 19/05/16 03:52 PM Author Share Posted 19/05/16 03:52 PM Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 7m 21d Gender: Male Location: Western Sydney Posted 19/05/16 08:23 PM Share Posted 19/05/16 08:23 PM Can't it take up to 43 full rotations to match up? Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m 21d Gender: Male Location: Adelaide Posted 19/05/16 08:51 PM Share Posted 19/05/16 08:51 PM 37 iirc and my arms remember haha keep spinning buddy if there lined up at that point they will eventually line up at TDC 2 Link to comment Share on other sites More sharing options...
dayjunkie Member 20 Member For: 15y 7m 6d Gender: Male Location: QLD Posted 20/05/16 04:17 AM Author Share Posted 20/05/16 04:17 AM seems timing is ok l Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 29d Gender: Male Location: Perth Posted 20/05/16 04:18 AM Share Posted 20/05/16 04:18 AM Crank pulley also lined up? Link to comment Share on other sites More sharing options...
dayjunkie Member 20 Member For: 15y 7m 6d Gender: Male Location: QLD Posted 20/05/16 04:19 AM Author Share Posted 20/05/16 04:19 AM pretty close mate few mm out do you know if this spring on the chain tensioner could contribute to the 'cam positon timeing over re-tard faults ' I get. this fault P1383 , P1388, recurring faults sometimes on idle , sometimes the moement I start it, and other times it seems when the car warms up with 20kms driving. It cuts power back and if ya up it feels like its surging and gutless, I have to reset the faults with the X2 each time. The only thing left to check is the fuel circuit. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 29d Gender: Male Location: Perth Posted 20/05/16 04:30 AM Share Posted 20/05/16 04:30 AM how far out is a few mm out? Are the teeth on the cam sprokets worn? Link to comment Share on other sites More sharing options...
dayjunkie Member 20 Member For: 15y 7m 6d Gender: Male Location: QLD Posted 20/05/16 04:39 AM Author Share Posted 20/05/16 04:39 AM Link to comment Share on other sites More sharing options...
demon1300 Member 435 Member For: 12y 10m 13d Gender: Male Posted 26/10/16 08:30 AM Share Posted 26/10/16 08:30 AM Quick question guys, are the vct solenoids both the same? Link to comment Share on other sites More sharing options...
skidxr6t skids Donating Members 2,754 Member For: 11y 11m 24d Gender: Not Telling Posted 26/10/16 08:41 AM Share Posted 26/10/16 08:41 AM (edited) yes, few different types though, as I found after a wrecker tore open an xr6t engine to grab some out for us! but the set of two will be the same..I'm 99% sure. You can clean em but one of mine didn't have continuity. Edited 26/10/16 08:44 AM by skidxr6t Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now